Securitron AQD6 User Manual

Securitron Power suppliers

Advertising
background image

Installation Manual

AQD6 12v/24v Series Power Supplies

Securitron Magnalock Corporation
10027 S. 51

st

St., Ste. 102

Phoenix, AZ 85044

Doc.# 500-33520 Rev A: Installation specifications subject to change without notice


Phone: (800) MAGLOCK

[email protected]

www.Securitron.com

Page 1 of 4

AQD6 Series 12/24 Power Supply/Charger

12VDC @ 6Amps / 24VDC @ 6 Amps Life Time Warranty

Small – Light – Efficient – Clean Power AQD6-16C
Field Selectable AC Input 115/230VAC
12vdc 6A/24vdc 6A Selectable
Tolerates brownout or overvoltage input

± 15% of nominal voltage

High efficiency: 90% @ 25V output, full

load

Battery charger maximum charge

current 0.7A

Dedicated battery charging circuit for

Wet, AGM, and sealed Lead Acid
Battery(s)

Power Limited Output with Thermal

Protection

Reverse Battery Protection
Battery Online, No Drop or Switch Over

with AC Power Fail

Quality Manufactured in the USA
UL Listed Access Control & Burglar

Alarm systems

Relay “C” Contacts Indicates AC Power

Status

Relay “C” Contacts Indicates Low Battery

Amber LED Indicates Power Normal

DC Output is Class II Power Limited

Ordering examples:

AQD6B

Supervised Power Supply/Charger module
without an enclosure.

AQD6

Supervised Power Supply/Charger module with
a 14”x14”x4.75” enclosure.

-8F
-8C
-16F
-16C
-8F8R
-8C1R

AQD6 with one PDB-8F
AQD6 with one PDB-8C
AQD6 with two PDB-8F
AQD6 with two PDB-8C
AQD6 with one PDB-8F8R
AQD6 with one PDB-8C1R

Description / Instructions

The AQD6 are heavy duty self contained, efficient,
clean, off-line switching power supplies with linear type
performance that is jumper selectable between 12vdc
at 6 Amps, and 24vdc at 6 Amps. Both have a
dedicated lead acid battery(s) charger that obtains
maximum battery life while providing a 12vdc or 24vdc
uninterruptible power supply for access control security
systems. The field selectable AC input allows these
power supplies to be powered anywhere in the world.
The AQD6 has exceptional brown out capability with
operation down to 85% of nominal voltage. The AQD6
has an extensive filtering system that provides linear
output performance. The AQD6 is electronically
protected against Battery reversal, shorting or

overloading. Power Limited Output with Thermal
Protection when in models AQD6-8F, AQD6-8C, AQD6-
16F, AQD6-16C, AQD6-8F8R, and AQD6-8C1R. Non
power limited when model AQD6. Each of these
protective features will self-restore. Before connecting
load and battery(s), move the 12v/24v jumper to desired
voltage. Caution, damage can occur when switched
with DC output load. Confirm proper voltage before
connecting devices. The AQD6 is UL Listed and has the
additional supervisory features of a battery disconnect
relay when battery(s) are depleted, a set of form “C” relay
contacts that indicates AC power failure, a set of form “C”
relay contacts to indicate low battery(s) and the DC
Output is Class II power limited. Depending on load, low

ASSA ABLOY, the global leader
in door opening solutions

Advertising