Sonnet Technologies Sonata Pro NuBus Video Card User Manual

Sonnet sonata pro 24 nubus video card

Advertising
background image

Software updates are available from the Sonnet web site at www.sonnettech.com.
Sonnet Technologies Customer Service hours are Monday-Friday, 8am-5pm Pacific Time.
Support Phone: 949-472-2772 • E-mail: [email protected]

Sonnet Technologies, Inc., 15 Whatney, Irvine, California 92618-2808 USA • Tel: 949-587-3500 • Fax 949-457-6350

© 1999 Sonnet Technologies, Inc. Revised 2001. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, and Sonata are trademarks of Sonnet Technologies, Inc.
Macintosh, Mac, and the Mac logo are trademark of Apple Computer, Inc., registered in the U.S. and other countries. Other product names are trademarks of their respective owners. Product
specifications subject to change without notice. Printed in the U.S.A. CG36100-111301

Sonnet Sonata Pro 24 NuBus Video Card

Installation Instructions for Power Macintosh 7100 & 8100

Items Packaged with the Sonnet Sonata Pro 24 NuBus Video Card:

• Sonata

Pro 24 NuBus video card

• Sonata Pro 24 diskette
• Installation instructions

System Software Compatibility:

• Compatible with System 7.1.2–Mac

®

OS 9.1.

We recommend you make a backup of important information on your hard drive
prior to installing new hardware or software. When handling computer products, you
must take care to prevent the components from being damaged by static electricity.
Always work in an area free of static electricity and avoid carpeted areas.

Please familiarize yourself with the following instructions before beginning the
installation. If you feel you are unable to install the computer hardware, please
contact a qualified computer technician.

1. Turn on your Power Macintosh

®

with the Command and Option keys

held down. Keep these keys held down until you see an alert box asking
if you want to rebuild the Desktop. Click OK.

2. Insert the Sonata Pro 24 diskette into the floppy disk drive. Double-click

on the Sonata Pro 24 Installer icon. By default, the software will be
installed on the boot drive. If this is ok, then click Install. Otherwise,
select another drive; then click Install. If the installation was successful, a
dialog box will appear. Click Quit to leave the Installer or click Continue
to perform additional installations.

The Sonata Pro 24 Installer will place three items onto the drive:
‘MacPicasso_Accel_PPC’, ‘MaPi YUV Accel’ and ‘MaPi MPEG Accel’ will
be placed in the Extensions folder.

The software installed in your System Folder does the following:

MacPicasso_Accel_PPC - Extension that uses the official method for
QuickDraw acceleration on the Sonata Pro 24 NuBus Video Card

MaPi YUV Accel - Extension designed to accelerate Cinepak movies
(256K and monochrome unaccelerated) on the Sonata Pro 24 NuBus
Video Card

MaPi MPEG Accel - Extension designed to accelerate MPEG movies on
the Sonata Pro 24 NuBus Video Card

3. Shut down your computer and turn off the power. If the computer has

been on for any length of time, wait a few minutes for it to cool before
continuing the installation.

4. Open your computer by first loosening the security screw(s) on the back

of the case with a large flat blade screwdriver. Gently slide the case cover
off the computer (Figure 1a & 1b).

Figure 1a: Remove the 7100 case

Figure 1b: Remove the 8100 case

Advertising