Harrington Hoists and Cranes Series 3 End Truck User Manual
Page 48
Table 7-3 Metric to Imperial Conversion Reference for "H" Values
17 mm
15 mm
13 mm
11 mm
9 mm
7 mm
0.67”
0.59”
0.51”
0.43”
0.35”
0.28”
7.5
Storage
7.5.1
Whenever the end trucks are to be placed into storage, place extra grease onto all
exposed unpainted parts such as the wheels, gears, collars and splines. Make certain
that no debris, dirt or moisture is allowed to accumulate on the end truck during
preparations for storage.
The storage location should be clean and dry.
7.6
Outdoor Installations
7.6.1
For crane system installations that are outdoors, the end trucks should be protected from
the weather when not in use.
7.6.2
In order to prevent internal corrosion from occurring, the end trucks may require
lubrication more often than once or twice per year.
48