Harwin Z80-255 User Manual
Harwin Tools
IS-27 Issue: 6 Date: 14.11.11 C/Note: 11542
Page 1 of 9
HAND CRIMP TOOL Z80-255
This Hand Crimp Tool has been designed for use with the following Datamate Trio-Tek Signal
Crimp Contacts:
M80-28300XX .............. Female crimp contact for 22-24 AWG wire, supplied loose
M80-28400XX .............. Female crimp contact for 26-28 AWG wire, supplied loose
M80-25300XX .............. Female crimp contact for 22-24 AWG wire, supplied reeled
M80-25400XX .............. Female crimp contact for 26-28 AWG wire, supplied reeled
Harwin recommend the use of BS 3G 210 Type A PTFE Equipment Wire or near equivalent.
Contact
Wire
Gauge
(AWG)
Typical Stranding
(no of strands/Ø
mm)
Conductor
cross-sectional
area (mm²)
Max Insulation
diameter (mm)
Crimp
height
(mm)
Minimum
pull-off
force
M80-25300XX
or
M80-28300XX
22 19/0.15
0.3358
1.10 0.76 –
0.82mm
45N
24 7/0.20
0.2199
0.95
29N
M80-25400XX
or
M80-28400XX
26 7/0.15
0.1237
0.80 0.50 –
0.56mm
18N
28 7/0.12
0.0792
0.71
9.8N
Harwin North America
Harwin Europe
Harwin Germany
Harwin Asia
T: +1 603 893 5376
T: +44 (0) 23 9231 4545
T: +49 (0) 89 3791 9400
T: +65 6 779 4909
E: