Harwin Z30-021 - Manual

IS-36 Issue: 2 Date: 27.07.12 C/Note: 11786 Page 1 of 7
HAND CRIMP TOOL Z30-021
This Hand Crimp Tool has been designed for use with the following crimp contacts:
M30-1050046 ............... 1.25mm Pitch Crimp Contacts for 26-30 AWG, Reeled, Tin
M30-1060046 .............. 1.25mm Pitch Crimp Contacts for 26-30 AWG, Bag of 100, Tin
Harwin recommend the use of BS 3G 210 Type A PTFE Equipment Wire, MIL-W-16878/4 and UL
style 1213 or near equivalents.
Contact
Wire
Gauge
(AWG)
Typical Stranding
(no of strands/Ø
mm)
Conductor
cross-sectional
area (mm²)
Minimum Pull-
off Force (N)
M30-1050046
OR
M30-1060046
26 7/0.15 0.1237 18.5
28 7/0.12 0.0792 8.5
30 1/0.25 0.049 7.0
Harwin North America Harwin Europe Harwin Germany Harwin Asia
T: +1 603 893 5376 T: +44 (0) 23 9231 4545 T: +49 (0) 89 3791 9400 T: +65 6 779 4909
E: [email protected] E: [email protected] E: [email protected] E: [email protected]