Innovative Tools & Technologies Innovative Mobile Masker™ - Manual

Innovative Mobile Masker™ Assembly Instructions
P/N I-MM
Install Total-Lock wheels onto base
leg P/N 750-040.
Assemble Roll Paper Support P/N 750-012 and
Tear Blade Support P/N 750-011 onto Cross
Support Tubes P/N 750-010. Install Tear Blades.
Tighten all bolts.
Install upright supports onto base leg
P/N 750-041. Do not tighten any bolts
until all parts are assembled.
Install Cross Support Tubes P/N 750-010 onto
upright supports. Note second open thru-hole
from bottom.
Install Tape Hub Assembly, Fender
Washer, Tension Spring, Collar and
Plastic Knob (see diagram 1).
1
3
5
2
4
6