APC NetBotz Room Monitor 355 NBWL0355 - Manual (Page 18)

14 NetBotz 355 Installation and Quick Configuration Manual
Adjust the Lens
View the camera feed during
the adjustment of the camera in
order to correctly adjust the
focus of the feed and field of
view settings.
To access the adjustment
screws, remove the lens
housing by turning the lens
housing counter-clockwise
until the latches disengage.
To reattach the lens housing,
engage the latches and rotate
the housing clockwise until a
click is heard.
To adjust the aperture of the
lens, rotate the aperture ring
clockwise to increase the
aperture or counter-clockwise
to reduce the aperture.
To adjust the focus and field of
view settings:
1. Loosen the adjustment
screw by turning it
counter-clockwise.
2. Rotate the lens rings to the
desired position.
3. Tighten the adjustment
screw by turning it
clockwise.
unlock
lock
field of view fine-focus
lens housing
aperture