LA STEELCRAFT FGS-24-2 - Manual

FGS-24-2
SOCCER GOAL
1
2
6
2
4
FGS-24-2
SOCCER GOAL
ITEM QTY. PART NO. DESCRIPTION
1 1 F04SG241 HORIZ 2-3/8" OD X 24'-0" w/ CENTER STUB
2 2 F04SG251 VERT 2-3/8" OD
3 2 F04SG252 END STAYS - 1-7/8" OD (LEFT AND RIGHT)
4 2 F04SG255 CORNER FITTING (LEFT AND RIGHT)
6 4 F04SG254 1-7/8" BRACES
7 4 F04SGOUA U ANCHOR
MODEL
DATE: 7/16/12 DRAWN BY: AFS DO NOT SCALE DRAWING
STEELCRAFT PRODUCTS
1 of 1
PHN 626-798-7401 FAX 626-798-1482
P.O. Box 90365 - Pasadena, CA 91109
SHEET
NOTE: SPECIFICATIONS ARE SUBJECT TO CHANGE
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1. LAY FRONT CROSS BAR FACE DOWN ON THE GROUND AND SLIDE THE CORNER
FITTINGS ON THE ENDS (NOTE LEFT AND RIGHT HAND) OF EACH FRAME. TIGHTEN THE
SET SCREWS.
2. SLIDE THE VERTICAL POSTS INTO THE CORNER FITTING WITH THE STUBS POINTING UP.
DO NOT TIGHTEN THE SET SCREWS.
3. SLIDE THE END STAYS INTO THE CORNER FITTING AND THE BOTTOM STUB ON THE
VERTICAL POST. TIGHTEN SCREWS.
4. SLIDE THE CENTER NET BRACE INTO THE CENTER STUB OF THE TOP HORIZONTAL.
TIGHTEN THE SET SCREWS.
5. SLIDE THE BRACES INTO THE STUBS AND TIGHTEN THE SET SCREWS.
6. RECHECK ALL THE SET SCREWS ON THE SLEEVES. ROTATE THE ASSEMBLY INTO
POSITION FOR PLAY.