LEDGlow Advanced 3 Million LED Underbody Kit & Wheel Well Lights User Manual
LEDGlow Lighting
Advanced 3 Million Wireless USB Underbody Kit & Wheel Well Lights
Warning:
Please check your state and local laws before installing this LED underbody kit. Every state has different policies and procedures in
place regarding aftermarket vehicle accessories. LEDGlow is not responsible for any fines that you may receive while using this underbody kit.
This kit is for off road use only.
Warning:
The installation of this kit is recommended to be installed by a licensed professional. The improper installation of this kit will void
all warranties.
The control box that is used to power the underbody and wheel well tubes must be installed in a dry location! Having this part exposed
to water or the elements will cause the kit’s controller to fail. Any water damage or corrosion to this part will VOID all warranties.
PLEASE READ THE FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE INSTALLING AND OPERATING THIS LED
UNDERBODY KIT.
Underbody & Wheel Well Kits Include:
(2) 48 Inch Underbody Tubes
(2) 36 Inch Underbody Tubes
(4) 24 Inch Wheel Well Tubes
(1) Control Box
(1) Wireless Remote
(2) USB Hubs
(1) USB Linking Cable
(14) Mounting Brackets
(25) Zip Ties
(30) Large Screws
Underbody Kit Installation:
1.
Arrange the tubes out on the ground and test the kit to ensure proper functionality before installing.
2.
Before mounting the underbody tubes, please refer to the schematic below. The underbody tubes on this kit must be
installed in a specific way. This ensures all lighting patterns are properly synchronized and displayed correctly.
Note: The tubes can be plugged into any of the ports on the USB hub and will not affect the patterns.
3.
Optional: Raise and support the vehicle.
4.
First, mount the front 36 inch tube with the red sticker to your vehicle using the included mounting brackets and zip ties. Make
sure the tube’s USB connector is facing the passenger side of the vehicle and is at least 8 inches away from any direct heat
source and away from all moving parts. Use the included zip ties to secure the underbody tube to the mounting bracket.
IMPORTANT: DO NOT MOUNT THE TUBE TO THE RADIATOR.