LockeyUSA TB 650 Plus - Manual

LockeyUSA | PO Box 543, Mt Pleasant, MI 48858 | www.LockeyUSA.com
TB250/450/650 Plus Instructions 1
Installation Instructions
Lockey® TB 250/450/650 Plus
Hydraulic Pedestrian Gate Closer
(with hydraulically adjustable closing speed)
The Lockey TB 250/450/650 Plus
Pedestrian Gate Closer is a fully
featured commercial closer that
provides consistent automatic
closing without slamming. This
gate closer has an adjustable
closing speed and a choice of
bracket fitting holes giving more
control of the gate when closing.
Mounted on the gate surface, the
Lockey TB Plus Pedestrian Gate
Closer is suitable for retrofitting to
existing gates and for fitting to
new gates at the time of
fabrication.
Each gate closer kit includes a
closer, brackets, fitting bar, and
instructions. Mounting bolts and
screws are not included as they
vary according to the gate and
post specification.
Maintenance is only regular
inspection and lubrication.
Closing speed is adjusted by
turning a hexagon headed screw
located on one eyelet.
As with all gate closers of this
type, it is advisable to fit a ‘stop’
restricting the opening angle to
avoid damage to the closer.
Technical overview
Model Gate Width Gate Weight
TB250 Plus 36-50” 75-160 lbs.
TB450 Plus 40-64” 75-175 lbs.
TB650 Plus 44-72” 150-250 lbs.
Quick reference
TB250 Plus TB400 Plus TB600 Plus
Max. opening angle 90° plus depends on hinge 90° plus depends on hinge 90° plus depends on hinge
Type of gate material Metal, wood, vinyl Metal, wood, vinyl Metal, wood, vinyl
Closing / latch speed Adjustable Adjustable Adjustable
Closer material Bright zinc plated steel Bright zinc plated steel Bright zinc plated steel
Hinge arrangements In-line and offset In-line and offset In-line and offset
Opening pressure Approximately 3-7 lbs. Approximately 6-12 lbs. Approximately 8-18 lbs.
Features
 Automatic close of gates up to 72” wide and 250 lbs.
 Hydraulically controlled nitrogen powered closing
 Installs on gate post and top, middle or bottom of right or
left hand gate
 Mounts on opening side of gate to push gate closed
 Maximum opening angle up to 110° depending on hinge
arrangement
 Mounting brackets and fitting bar included