Spigen Steinheil ENHANCED OPTICAL HARD COATED FILM for Laptops User Manual

Installation guide, For laptops

Advertising
background image

1. Adjust the position of the film before installation on the

device. The film is made slightly smaller than the actual LCD size

for easier application. (Steinheil™ Screen Protector is designed

to have little margins on four sides so you can adjust or remove

the film easily)

2. Spray the Cleaner Spray on Micro-Fiber Fabric. Clean the LCD

Screen with the fabric. But, DO NOT spray directly on the LCD

Screen . (Clean your hands and make sure the device is stable)

3. Separate about half of the release film layer and start apply-

ing the Steinheil™ Screen Protector on the device. Remove the

rest of the release film layer as you install the Screen Protector

onto the device. (Slightly sweep through the surface of the film

with the provided squeegee to avoid air bubbles)

4. If you find any dust under the film after installation, use

sticky-tape to remove the dust as shown in the picture.

Installation Guide

for Laptops

Advertising