AMD Geode LX 800@0.9W - Manual (Page 451)

AMD Geode™ LX Processors Data Book 451
Video Processor Register Descriptions 33234H
6.8.3.42 Video Coefficient RAM (VCR)
6.8.3.43 Panel Timing Register 1 (PT1)
VP Memory Offset 1000h-1FFFh
Type
R/W
Reset Value xxxxxxxx_xxxxxxxxh
VCR Register Map
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
VC3 VC2
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
VC1 VC0
VCR Bit Descriptions
Bit Name Description
63:48 VC3 Coefficient 3. Coefficient for tap 3 of filter.
47:32 VC2 Coefficient 2. Coefficient for tap 2 of filter.
31:16 VC1 Coefficient 1. Coefficient for tap 1 of filter.
15:0 VC0 Coefficient 0. Coefficient for tap 0 of filter.
VP Memory Offset 400h
Type
R/W
Reset Value 00000000_00000000h
PT1 Register Map
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
RSVD
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RSVD
FP
_
V
SYNC
_
PO
L
FP_HSYNC_POL
RSVD
H
S
YN
C_SRC
RSVD
HSYNC
_
DELA
Y
HSYNC_PLS_WIDTH
PT1 Bit Descriptions
Bit Name Description
63:32 RSVD (RO) Reserved (Read Only). Reads back as 0.
31 RSVD Reserved. This bit is not defined.
30 FP_VSYNC_
POL FP_VSYNC Input Polarity. Selects positive or negative polarity of the FP_VSYNC input.
Program this bit to match the polarity of the incoming FP_VSYNC signal. Note that FP
Memory Offset 408h[23] controls the polarity of the output VSYNC.
0: FP_VSYNC is normally low, transitioning high during sync interval. (Default)
1: FP_VSYNC is normally high, transitioning low during sync interval