AMD Geode LX 800@0.9W - Manual (Page 505)

AMD Geode™ LX Processors Data Book 505
Video Input Port Register Descriptions 33234H
6.10.2.23 VIP Ancillary Data/Message Passing/Data Streaming Buffer 2 Base Address (VIP_ANC_MSG_2_BASE)
6.10.2.24 VIP Ancillary Data/Message Passing/Data Streaming Buffer Size (VIP_ANC_MSG_SIZE)
VIP Memory Offset 5Ch
Type
R/W
Reset Value 00000000h
VIP_ANC_MSG_2_BASE Register Map
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ANC_MSG_2_BASE Program to 00000
VIP_ANC_MSG_2_BASE Bit Descriptions
Bit Name Description
31:0 ANC_MSG_2_
BASE Message Passing Data/Data Streaming Base Address. This register specifies the
base address for the second buffer used in Message Passing and Data Streaming
modes. Data written to this register takes place immediately (no double buffer). The
value in this register must be 32-byte aligned. (Bits [4:0] are required to be 00000.)
Note: This register is NOT double buffered.
VIP Memory Offset 60h
Type
R/W
Reset Value 00000000h
VIP_ANC_MSG_SIZE Register Map
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ANC_PACK_INT_THRESH RSVD ANC_MSG_STREAM_SIZE
VIP_ANC_MSG_SIZE Bit Descriptions
Bit Name Description
31:24 ANC_PACK_
INT_THRESH Ancillary Packet Interrupt Threshold Value. This value determines when the ancillary
interrupt occurs. The Ancillary Packet Count (APC) bits (VIP Memory Offset 08h[31:24])
is compared to this value. If the APC is equal to or greater then this value, the ancillary
interrupt is generated.
23:19 RSVD Reserved.
18:0 ANC_MSG_
STREAM_SIZE Ancillary Data/Message Passing Data/Data Streaming Buffer Size. This register
specifies the size of the ancillary, message passing, and data streaming buffers in bytes.
Changes to this register take effect immediately (not double buffered). The value in this
register is 8-byte aligned. Bits [2:0] are ignored.