AMD Geode LX 800@0.9W - Manual (Page 77)

AMD Geode™ LX Processors Data Book 77
GLIU Register Descriptions 33234H
4.2.3.7 DA Compare Value High (DA_COMPARE_VAL_HI[0:3]
The DA Compare Value and the DA Compare Mask enable traps on specific transactions. A hit to the DA Compare is deter-
mined by hit = (DA_IN & DA_COMPARE_MASK) == DA_COMPARE_VAL). A hit can trigger the DA_CMP error sources
when they are enabled. The value is compared only after the packet is arbitrated.
Data Compare Value High (DA_COMPARE_VAL_HI[0])
Data Compare Value High (DA_COMPARE_VAL_HI[1])
Data Compare Value High (DA_COMPARE_VAL_HI[2])
Data Compare Value High (DA_COMPARE_VAL_HI[3])
MSR Address GLIU0: 100000D1h
GLIU1: 400000D1h
Type R/W
Reset Value 0000000F_FFFFFFFFh
MSR Address GLIU0: 100000D5h
GLIU1: 400000D5h
Type R/W
Reset Value 0000000F_FFFFFFFFh
MSR Address GLIU0: 100000D9h
GLIU1: 400000D9h
Type R/W
Reset Value 0000000F_FFFFFFFFh
MSR Address GLIU0: 100000DDh
GLIU1: 400000DDh
Type R/W
Reset Value 0000000F_FFFFFFFFh
DA_COMPARE_VAL_HI[0:3] Register Map
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
RSVD DAHI_VAL
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAHI_VAL
DA_COMPARE_VAL_HI[0:3] Bit Descriptions
Bit Name Description
63:36 RSVD Reserved.
35:0 DAHI_VAL DA Packet Compare Value [80:45]. This field forms the upper portion of the data value
which is compared to the logical bit-wise AND of the incoming data value AND the data
value compare mask in order to determine a ‘hit’. The “HI” and “LO” portions of the
incoming data, the compare value, and the compare mask, are assembled into complete
bit patterns before these operations occur.