4 p2d range offset descriptor (p2d_ro), 10000029h- 1000002bh, 00000000_000fffffh – AMD Geode LX [email protected] User Manual
Page 83
AMD Geode™ LX Processors Data Book
83
GLIU Register Descriptions
33234H
4.2.4.4
P2D Range Offset Descriptor (P2D_RO)
See Table 4.1.3.1 "Memory Routing and Translation" on page 47 for details on the descriptor usage.
GLIU0
P2D_RO[2:0]
MSR Address
10000029h-1000002Bh
Type
R/W
Reset Value
00000000_000FFFFFh
P2D_RO Register Map
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
PDID1
PCMP_BIZ
OFFSET
PMAX
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
PMAX
PMIN
P2D_RO Bit Descriptions
Bit
Name
Description
63:61
PDID1
Descriptor Destination ID. These bits define which Port to route the request to, if it is a
‘hit’ based on the other settings in this register.
000: Port 0 (GLIU0 = GLIU; GLIU1 = GLIU.)
001: Port 1 (GLIU0 = GLMC; GLIU1 = Interface to GLIU0.)
010: Port 2 (GLIU0 = Interface to GLIU1; GLIU1 = VP.)
011: Port 3 (GLIU0 = CPU Core; GLIU1 = GLCP.)
100: Port 4 (GLIU0 = DC; GLIU1 = GLPCI.)
101: Port 5 (GLIU0 = GP; GLIU1 = VIP.)
110: Port 6 (GLIU0 = Not Used; GLIU1 = SB.)
111: Port 7 (GLIU0 = Not Used; GLIU1 = Not Used.)
60
PCMP_BIZ
Compare Bizzaro Flag.
0: Consider only transactions whose Bizzaro flag is low as a potentially valid address hit.
A low Bizzaro flag indicates a normal transaction cycle such as a memory or I/O.
1: Consider only transactions whose Bizzaro flag is high as a potentially valid address
hit. A high Bizzaro flag indicates a ‘special’ transaction, such as a PCI Shutdown or
Halt cycle.
59:40
POFFSET
Physical Memory Address 2’s Comp Offset. 2s complement offset that is added to
physical address on a hit.
39:20
PMAX
Physical Memory Address Max. These bits form the value denoting the upper (ending)
address of the physical memory, which is compared to determine a hit.
19:0
PMIN
Physical Memory Address Min. These bits form the value denoting the lower (starting)
address of the physical memory, which is compared to determine a hit. Hence, a hit
occurs if the physical address [31:12] >= PMIN and <= PMAX.