Tracer TP-3400 Dye-Lite M-L AM13008 User Manual

Dye-lite, Tp-3400

Advertising
background image

Dye-Lite

®

TP-3400

All-In-One™ Fluorescent Leak Detection Dye

For Oil and Oil-Based Fluids

U.S. Patent No. 6,165,384

• Dye-Lite

®

All-In-One™ multipurpose fluorescent leak detection dye is

used in conjunction with Tracerline

®

ultraviolet or UV/blue light lamps

to pinpoint leaks in oil and oil-based fluid systems.

• Do Not Add to Brake Systems.

• You must wear fluorescence-enhancing glasses to protect your eyes

and to make leaks clearly visible. The glow will show best under low

light conditions.

• PLEASE NOTE: Wipe all dye spills immediately to prevent damage to

paints, finishes and bumpers. Dye may stain hands and clothing.

ADDING DYE AND INSPECTING FOR LEAKS

Turn OFF the engine. Add TP-3400 through the appropriate fill port.

The recommended dilution ratios of dye to host fluid are:

Automotive applications

Suggested dilution ratio

Engine oil

(includes synthetics)

Gasoline

0.5 oz per 4-6 qt

Diesel

0.5 oz per 4 qt

Power steering fluid

0.5 oz per 4 qt

Automatic transmission fluid 1 oz per 12 qt

Gasoline and diesel fuels

1 oz per 12-18 gal

Mobile hydraulic applications Suggested dilution ratio

Light-colored petroleum-based fluids 1 oz per 4-6 gal

Very dark or intensely blue

petroleum-based fluids

1 oz per 4-6 qt

NOTE: If the oil is very dirty, you may need to add more dye to obtain a good

fluorescent response (additional dye will not harm the engine) or change the

oil or fluid before adding the dye.

Run the engine for 5 to 10 minutes so the oil or fluid and dye will mix well.

Use a Tracerline

®

ultraviolet or UV/blue light lamp to inspect the dipstick or

fill port and check for a bright fluorescent response. Add more dye if needed.

A short road test is recommended to allow the dye to penetrate all leaks prior

to inspection.

Turn OFF the engine. Inspect possible leak areas with the Tracerline

®

lamp. In hard to reach areas, use a mirror to reflect the light, or wipe

suspected areas with a clean, white cloth. Check the cloth with the lamp for

fluorescence. All leaks will show with a bright yellow-green glow.

After the leaks are repaired, clean the remaining dye from the leak sites with

Tracer Products’ GLO-AWAY™ dye cleaner/remover or a shop cleaner.

Remaining dye could be mistaken for a leak. Check all areas again with the

lamp to make sure that no dye remains. Run the engine for another 5 to 10

minutes and reinspect with the lamp to be sure that all leaks have been

repaired and no new leaks appear.

It is not necessary to change the oil or fluid after adding the tracer dye.

When used properly, Dye-Lite

®

can safely remain in the system until the host

fluid is changed.

CAUTION

Keep out of reach of children. Store in a cool place away from direct

sunlight, heat sources and open flame. May be harmful or fatal if

swallowed. Avoid contact with eyes or skin. Wash thoroughly after

handling. Wipe all spills to avoid stains.

For product information and technical assistance, call us at

1-800-641-1133. Outside the United States call 516-333-1254. Emergency

Telephone No.: 1-800-424-9300 (24 Hours) CHEMTREC. Call collect

outside continental U.S.: 703-527-3887. Consult Material Safety Data Sheet

(MSDS) on our website at www.tracerline.com.

English

• Le colorant fluorescent polyvalent de détection de fuites Dye-Lite

®

All-In-One™ est utilisé conjointement avec les lampes à ultraviolets

Tracerline

®

ou aux UV/lumière bleue afin de découvrir des fuites dans

les circuits d’huile ou de liquides à base d’huile.

• Ne pas ajouter au circuit de freinage.

• Vous devez porter des lunettes d’amélioration de la fluorescence afin

de protéger vos yeux et de rendre les fuites clairement visibles. La

visibilité de la fluorescence ne sera que meilleure dans des conditions

d’éclairage faible.

• VEUILLEZ NOTER: Essuyez immédiatement tout déversement de

colorant afin d’éviter d’endommager les peintures, les finitions et les

pare-chocs. Le colorant peut tacher les mains et les vêtements.

Dye-Lite

®

TP-3400

Colorant fluorescent de détection de fuites All-In-One™

Pour l’huile et les liquides à base d’huile

Brevet U.S. No 6,165,384

French

(1,1) -2- TP-3400 Dye-Lite (was A03129) AM13008.indd 4/11/2013 4:16:34 PM

(1,1) -2- TP-3400 Dye-Lite (was A03129) AM13008.indd 4/11/2013 4:16:34 PM

Advertising