Tracer TP-3837 A95248-2 - Manual

STEP
1
STEP
2
STEP
3
STEP
4
Connecting to the A/C system
For low-side charging, use the TP-3837:
Connect the quick coupler to the low-side service port of the system. Connect the service valve fitting to the low-side
quick coupler on the manifold or recovery unit.
For high-side charging, use the TP-9837:
Connect the quick coupler to the high-side service port of the system. Connect the service valve fitting to the high-side
quick coupler on the manifold or recovery unit.
Connecting the Tracer-Stick capsule to the service valve fitting
Turn the capsule over so the embossed arrow is pointing down. Remove the second cap and connect the service
valve fitting (supplied). Finger-tighten only.
Connecting the Tracer-Stick capsule to the control valve
Hold the Tracer-Stick capsule so that the embossed arrow is pointing up. Remove the black cap and attach the
capsule to the control valve (see diagram). Finger-tighten only.
Evacuating the connect set
Evacuate or purge the Universal Connect Set hose assembly. Close all valves finger-tight. Do not force. This will
damage the valve seat.
Universal Connect Set
™
Your choice for R-134a low-side or high-side charging
with PAG and Ester Tracer-Stick ® Capsules
TP-3837 for Low-Side Charging • TP-9837 for High-Side Charging
Tracer-Stick ® capsules are prefilled with Fluoro-Lite ® UV-fluorescent dye. Tracerline ® Universal Connect Sets™ make R-134a
A/C leak detection faster, easier and cleaner. They attach to 3/8-inch, 10mm and 1/2-inch hose fittings. The 18-inch hose
remains purged after the first use.
Use with Tracer-Stick capsules TP-3865, TP-3866, TP-3867 (for PAG) and TP-3875, TP-3876, TP-3877 (for ester).
For low-side charging, use TP-3837. For high-side charging, use TP-9837.
For detailed instructions about using the Tracer-Stick capsules, see the instruction sheet packed with them.