TREND 915MDS - Manual

1 915MDS Installation Instructions TG200329 Issue 2/C 31/07/06
Important: Retain these instructions
Installation Instructions
915MDS
Mobile Display Software
INSTALLATION ON PC
Install the software 2
a Insert CD b Follow the instructions on
the screen.
If autorun is disabled, run
‘setup.exe’ from the root of the
CD.
Ø
Check PC Configuration
Pentium II 200 MHz, 64 Mb RAM, 1 Gb
hard disk, CD-ROM drive, Graphics Card
with 2 Mb of RAM capable of 1024 X
768 (256 colours), 17" monitor,
keyboard, mouse, 1 serial port, 1 parallel
port, and Microsoft Windows 95
® /98 ® .
>=
1
Run 915 3
a Choose ‘ Start\Programs\Trend 915MDS ’.
Obtain a Licence 4
Ø
a Choose ‘ Help>Register Licence ’.
b Enter the ‘serial number’.
Ø
c Click on ‘Request’.
Ø
d Enter all the details.
e Click on ‘OK’.
f Load ‘Licence txt located in directory in which the
915MDS is installed into Notepad, and print it out.
g Fax the printout to the ‘Trend Customer Services
Department on +44 (0) 1403 217392.
Ш
Ш
If you are entitled to a Type 1 licence, you should also contact your account manager to obtain another unlock code which
will allow access to the additional features. This licence will be time limited, once it expires you can either obtain another
from your account manager, or use the original (Type 1) licence to continue using 915 without the additional features.
Ø
Enter the Unlock Code 5
Ш
Ш
a Run 915.
b Choose ‘ Help>Register Licence ’.
c Enter the ‘Unlock code’.
d Click on ‘Unlock’.