Warner Electric Model Description Explanation for Limit and Cable Pull Switches - Manual

Actuator/Lever & Sealing
Identification
IW = Inner Seal
W= Outer Seal
Designation Description/Action
Standard Plunger
ST Adjustable Plunger
K Pushbutton
R Roller
H Lever
HL Longer Lever
AH Turret Head/Roller Arm
AD Turret Head with Rod
AV Turret Head/Adjustable
AF Turret Head/Whisker
AHS28 Turret Head - 28MM Arm w/Roller
AHS40 With 40MM Arm w/Roller
ASH50 With 50MM Arm w/Roller
FF Wobble Stick
KN Angled Roller Lever w/Plunger
KG Lever One Direction
DGK Adjustable Lever Plunger – 18-24MM
DGH Adjustable Lever Plunger – 6-12MM
HT Lever w/Steel Roller
L Roller
DB BI Roller Lever
KU Low Set Plunger (Ball)
FFL Longer Wobble Stick
P Palmbutton
Note: In the case of Cable Pull Switches, no actuator/lever
designation is required. This switch uses a hook arrangement.
_____
(Dash)
Designation Function Explanation
U1 1 NO / 1 NC
Slow Action
Break Before Make
U2 2 NO / 2 NC
Slow Action
Break Before Make
SU1 1 NO / 1 NC
Snap Action
SU2 2 NO / 1 NC
Snap Action
UV1 1 NO / 1 NC
Contacts Overlapping
Make Before Break
Z Positive Disconnect of NC
U1Z 1 NO / 1 NC with Positive
Disconnect of NC
SU1Z 1 NO / 1 NC
Snap Action with Positive
Disconnect of NC
A1 Special Contact – 1 NC
A2 Special Contact – 2 NC
E1 Special Contact – 1 NO
E2 Special Contact – 2 NO
UV15Z 2 NC / 1 NO Positive Disconnect
of NC. Make Before Break
UV16Z 1 NC / 2 NO Positive Disconnect
of NC. Make Before Break
U15Z 2 NC / 1 NO Positive Disconnect
of NC. Break Before Make
U16Z 2 NO / 1 NC Positive Disconnect
of NC. Break Before Make
Model
Housing
_____
(Dash)
Contact Block &
Switching Functions
Designation Model/Type
C COMBI Limit Switch
P PILOT Limit Switch
TI2 TINY Limit Switch
BI Biggy Limit Switch
I88 I88 Limit Switch
ENK ENK Limit Switch
ENM2 ENM Limit Switch
GC GC Limit Switch
D D Limit Switch
SN2 SN2 Limit Switch
SI Cable Pull Switch I88 Housing
SiL Safety Pull Switch I88 Housing
SEK Cable Pull Switch ENK Housing
SiEK Safety Pull Switch ENK Housing
SEM Cable Pull Switch ENM Housing
SiEM Safety Pull Switch ENM Housing
SGC Cable Pull Switch GC Housing
SiGC Safety Pull Switch GC Housing
SD Cable Pull Switch D Housing
SiD Safety Pull Switch D Housing
SiN Safety Pull Switch N Housing
Si1 Safety Pull Switch 1 Housing
Si2 Safety Pull Switch 2 Housing
*Should the Limit Switch or Cable Pull Switch
you require not be shown as a standard
product, please do not hesitate to contact
the Warner Office as many other designs are
available.
NO = Normally Open
NC = Normally Closed Warner Electric LLC
31 Industrial Park Road • New Hartford, CT 06057
815-389-3771 • Fax: 815-389-2582
www.warnerelectric.com
P-1425 819-0391 6/12 Printed in USA
Model Description Explanation for Limit and Cable Pull Switches
Description Explanation
P-1425
819-0391