Powermate P024-0139SP User Manual

Powermate Tools

Advertising
background image

Heavy Duty Air Hammer Instruction Manual

Marteau pneumatique haute résistance Manual d’instructions

Martillo neumático altamente resistente Manual de instrucciones

200-2598 , Rev. B, 9-07

Read and understand all safety precautions in this manual before operating. Failure to

comply with instructions in this manual could result in personal injury, property damage and/or voiding of
your warranty. The manufacturer WILL NOT be liable for any damage because of failure to follow these
instructions.

Lisez et veillez à bien comprendre toutes les consignes de sécurité de ce

manuel avant d'utiliser l'appareil. Toute dérogation aux instructions contenues dans ce manuel peut
entraîner l'annulation de la garantie, causer des blessures et/ou des dégâts matériels. Le fabricant NE
SAURA
être tenu responsable de dommages résultant de l'inobservation de ces instructions.

Lea y comprenda todas las precauciones de seguridad contenidas en este

manual antes de utilizar esta unidad. Si no cumple con las instrucciones de este manual podría ocasionar
lesiones personales, daños a la propiedad y/o la anulación de su garantía. El fabricante NO SERÁ
responsable de ningún daño por no acatar estas instrucciones.

Model No.

P024-0139SP

T

T

OOL

OOL

SPECIFICA

SPECIFICA

TIONS

TIONS

CARACTÉRISTIQUES DE L'OUTIL

CARACTÉRISTIQUES DE L'OUTIL

ESPECIFICACIONES DE LA

ESPECIFICACIONES DE LA

HERRAMIENT

HERRAMIENT

A

A

Blows per minute .............................................................3,500
Chisel shank ...............................................................10.2 mm
Stroke length ...................................................................2-5/8”
Maximum Working Pressure..........................................90 PSI
Air consumption .........................................4.0 CFM @ 90 PSI
Air Inlet .........................................................1/4” NPT (female)
Recommended hose size ...................................................3/8”

Coups-minute...................................................................3,500
Tigre du burin..............................................................10,2 mm
Course ........................................................................66,7 mm
Pression de fonctionnement..........................6,2 bars (90 PSI)
Consommation d'air ........................................0,11 m³/min (4,0

pi³/min) à 620,5 kPa (90 psi)

Entré d'air...................................................6,35 mm (1/4”NPT)
Taille de tuyau flexible recommandée..............10 mm (3/8 po)

GPM..................................................................................3500
Zanco del cincel..........................................................10,2 mm
Longitud de carrera .........................................................2-5/8”
Presión de operación .....................................................90 PSI
Consumo de aire .........................................4.0 CFM a 90 PSI
Entrada de aire...........................................................1/4" NPT
Tamaño recomendado de manguera .................................3/8”

Advertising