Pumptec 356U SERIES - Manual

Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com
Pumptec pump series 348U | 350U | 356U with plunger type design is the most efficient way possible to
pressurize water. This efficiency produces up to 20% more pressure or flow for a given power input compared
to competitive pumps. The series offers a variety of pump and motor combinations customized to meet specific
application requirements. Typical applications include pressure cleaning, pest spraying and misting. All pumps
are factory lubricated for long-life performance. The only tool to completely disassemble the pump to its basic
components is a 3/16” hex wrench. Durability and performance results from exclusive use of premium materials.
All metallic wetted parts are stainless steel. An aircraft-grade anodized aluminum pump with Teflon hard-coat
body is nearly indestructible compared to pumps made of castings. The body offers chemical compatibility with
a wide variety of chemicals. Epoxy and other coatings are available for high and low pH applications. Flow and
pressure can be optimized to exactly match power input to nozzle size, and offers an assortment of eccentrics
for low, medium and high pressure to match your application requirement.
Version 061113
PerforMANce feAtureS
• Long Life
• High-Pressure
• High-Efficiency
• Serviceability
• Durability
• Application Flexibility
• Chemical Compatibility
• Compact Design
• Enhanced Priming
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the
product described. Protect yourself and others by observing all safety information. Failure to comply with instructions
could result in personal injury and/or property damage in which Pumptec, Inc. will not assume any liability for! Retain
instructions for future reference.
PUMP SERIES
348U | 350U | 356U