Pumptec PRESSURE WASHER User Manual
Pressure washer
Pumptec pump series 356U with plunger type design is the most efficient way possible to pressurize water.
This efficiency produces up to 20% more pressure or flow for a given power input compared to competitive
pumps. The series offers a variety of pump and motor combinations customized to meet specific application
requirements. Typical applications include pressure cleaning, pest spraying and misting. All pumps are factory
lubricated for long-life performance. The only tool to completely disassemble the pump to its basic components
is a 3/16” hex wrench. Durability and performance results from exclusive use of premium materials. All metallic
wetted parts are stainless steel. An aircraft-grade anodized aluminum pump with Teflon hard-coat body is nearly
indestructible compared to pumps made of castings. The body offers chemical compatibility with a wide variety
of chemicals. Epoxy and other coatings are available for high and low pH applications. Flow and pressure can be
optimized to exactly match power input to nozzle size, and offers an assortment of eccentrics for low, medium
and high pressure to match your application requirement.
Version 110112
Pumptec, Inc. | 700 McKinley St. NW, Anoka, MN 55303 | 763-433-0303 | www.pumptec.com
PerforMANce feAtureS
• Long Life
• High-Pressure
• High-Efficiency
• Serviceability
• Durability
• Application Flexibility
• Chemical Compatibility
• Compact Design
• Enhanced Priming
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the
product described. Protect yourself and others by observing all safety information. Failure to comply with instructions
could result in personal injury and/or property damage in which Pumptec, Inc. will not assume any liability for! Retain
instructions for future reference.
PRESSURE WASHER
PN 80729
PN 80390