Markings – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 7
7/10
Markings
ATEX and markings, applied to the ST and GP Series modules
Models
ST400 series and ST-3200 series:
Models GP-3200 series:
Models
GP-3400 and GP-3500 series:
Digital Electronics Corporation
559-0031 Osaka Japan
II 3 G D
Ex nA nC IIC T4 Gc
Ex tc IIIB T135°C Dc IP64
INERIS 07ATEX3003X and
Addition 01 / 02
Tamb: 0°C to +50°C
WARNING: Do not disconnect while
circuit is live. Potential electrostatic
charges. Wipe the front panel of the
terminal with a damp cloth before
turning on.
Digital Electronics Corporation
559-0031 Osaka Japan
II 3 G D
Ex nA nC IIB T4 Gc
Ex tc IIIB T135°C Dc IP64
INERIS 07ATEX3003X and
Addition 01 / 02
Tamb: 0°C to +50°C
WARNING: Do not disconnect while
circuit is live. Potential electrostatic
charges. Wipe the front panel of the
terminal with a damp cloth before
turning on.
Models
GP-3300 series:
Models
GP-3600 and GP-3700 series:
Digital Electronics Corporation
559-0031 Osaka Japan
II 3 G D
Ex nA nC IIB T3 Gc
Ex tc IIIB T200°C Dc IP64
INERIS 07ATEX3003X and
Addition 01 / 02
Tamb: 0°C to +50°C
WARNING: Do not disconnect while
circuit is live. Potential electrostatic
charges. Wipe the front panel of the
terminal with a damp cloth before
turning on.
Digital Electronics Corporation
559-0031 Osaka Japan
II 3 G D
Ex nA nC IIB T4 Gc
Ex tc IIIB T135°C Dc IP64
INERIS 07ATEX3003X and
Addition 01 / 02
Tamb: 0°C to +50°C
WARNING: Do not disconnect while
circuit is live. Potential electrostatic
charges. Wipe the front panel of the
terminal with a damp cloth before
turning on.