Proface AGP3500 - 10.4 DIO HMI" - Manual

-1-
RS-232C/485 Isolation Unit
Installation Guide
Thank you for purchasing Pro-face's RS-232C/485 Isolation Unit (CA3-ISO232-01/
CA3-ISO485-01). This unit is designed to utilize Pro-face product,Display(Unit) serial
interface connector (D-sub9-pin), and electrically separates the serial interface signal
from the Display's chassis.
For the details of the applicable models, please refer to each Display’s Hardware
Manual or Pro-face Home Page.
URL
http://www.pro-face.com/
• To avoid an electric shock, prior to connecting this unit to the
Display's serial interface, confirm that the Display's power supply is
completely turned OFF, via a breaker, or similar unit.
• Do not modify this unit. Doing so may cause a fire or an electric shock.
• Do not use this unit in an environment where flammable gases are
present, since operating this unit may cause an explosion.
• When disposing of this product, be sure to do so according to your
country’s standards for industrial waste disposal.
„ „ „ „ „ General Safety Precautions
• Do not allow water, liquids, metal or charged particles to enter inside this unit,
since they can cause either a unit malfunction or an electrical shock.
• Do not use or store this unit in direct sunlight, in excessively dusty or dirty
environments or where excessive vibration can occur.
• Do not store or use this unit where strong jolting can occur.
• Do not store or use this unit where chemicals (such as organic solvents, etc.)
and acids can evaporate, or where chemicals and acids are present in the air.
WARNINGS
Essential Safety Precautions