Proface LT4200M - 3.5 Modular HMI + Control" - Manual

©2012 Pro-face. All rights reserved. Specifications may change without notice.
Datasheet
3.5” Quick Mount HMI/Controller: LT4201M Series
TouchPanel
Operation
Features:
•65,536 color, LED backlit TFT color LCD Display
• Separate Front and Rear Module all for quick
installation in 22mm hole
• 64-bit RISC CPU for ultra-fast screen refresh and
communication
• No grid analog touch panel for improved
visibility and precise part placement
• Supports a large selection of Serial or Ethernet
protocols (Set up to 4 Ethernet or 3 Ethernet and
1 serial protocol.)
• USB Interfaces can be used for project transfer
and to connect BCR scanners, printers, and
memory devices.
• Programmed with the versatile GP-Pro EX Screen
Development Software
• Multiple Mounting Options Available
Specifications
Model LT-4201TM (type AIO) LT-4201TM (type DIO)
Order Numbers PFXLM4201TADAC (Source)
PFXLM4201TADAK (Sink)
PFXLM4201TADDC (Source)
PFXLM4201TADDK (Sink)
Display Size and Type 3.5” TFT Color LCD
Colors 65536 colors
Resolution 320 x 240 pixels (QVGA)
Brightness
Adjustment
16 levels of adjustment available via touch panel in the Configuration menu
Backlight White LED adjustable on/off control
Area W 70.56 x H 52.92 mm [W 2.78 x H 2.08 in]
Touch Panel Resistive Film (Analog) 1024 x 1024 pixels
Memory Application 16MB FLASH EPROM (Capacity available for user application)
Data Backup 128KB nvSRAM
Logic Program
Area
132KB FLASH EPROM (equivalent to 15,000steps)
Interfaces Serial (COM1) x1 RS232C / RS485 (RJ45)
Ethernet x1 10/100BASE-T
USB x 1 (USB 2.0 Type A), x1 (USB 2.0 Mini-B)
CANOpen CANopen master (Sub-D9) (supported 2014)
Built in DIO (Input) 12 points (configurable 2 x High Speed counter/
Pulse catch or 1 Up/Down High Speed Counter)
20 points (configurable 2 x High Speed counter/
Pulse catch or 1 Up/Down High Speed Counter)
Built in DIO (Output) 8 points (configurable 2 x PWM/Pulse) 12 points (configurable 2 x PWM/Pulse)
Built in AIO (Input) 4 points (Voltage/Current x2 - Temperature input
x2 included)
0 points
Built in AIO (Output) 2 points (Voltage/Current x2) 0 points
Clock Battery backed clock
General Specifications
Model PFXLM4201TADAC (Source)
PFXLM4201TADAK (Sink)
PFXLM4201TADDC (Source)
PFXLM4201TADDK (Sink)
Electrical Input Voltage Limits 24Vdc
Rated Voltage 20.4Vdc to 28.8Vdc
Power Consumption ≤ 12 W ≤ 9W
Environmental Ambiant Oper-
ating Temp
Horizontal Installation 0...50 °C (32...122 °F)
0...40 °C (32...104 °F)
Vertical Installation
Storage Temperature - 20...60 °C (- 4...140 °F)
Relative Humidity 5...85% w/o condensation (non-condensing, wet bulb temperature 39 °C (102.2 °F) or less)
Altitude Operation 0...2,000 m (0...6,560 ft)
Vibration & Shock
Resistance
Mounted on a
DIN rail
3.5 mm (0.138 in.) fixed amplitude from 5...8.4 Hz 9.8 m/s2 (1 gn) fixed acceleration from 8.4...150 Hz
Mounted on a
panel
3.5 mm (0.138 in.) fixed amplitude from 5...8.6 Hz 9.8 m/s2 (1 gn) fixed acceleration from 8.6...150 Hz
Structural Ratings Front module IP65f, NEMA Type 4x, rear module IP20
Certifications CE,, UL Listed, RoHS, GOST
Cooling Method Natural Air Circulation
Weight LT-4201TM (Modular Type Analog): 531 g (18.73 oz) LT-4201TM (Modular Type DIO): 496 g (17.49 oz)
Warranty Two year standard
3.5 inch TFT Color LCD
Fan-less, Diskless Quick Mount HMI\/Controller
LT4201M
Model: PFXLM4201TADAC, PFXLM4201TADAK, PFXLM4201TADDC, PFXLM4201TADDK
DC24Vdc
QVGA
3.5-inch
Ro
Powered by