Proface FP3900 - 19 Flat Panel" - Manual

1
Thank you for purchasing the PS600-BU00 replacement backlight.
Be sure to read the following Backlight Replacement Warnings prior to replacing
your GP/PS’s backlight.
This replacement backlight package contains the following:
• Change the entire backlight unit, i.e. both the tube and holder.
• Do not allow water, oil or fingerprints to remain on the tube, since
they can all reduce the backlight's life.
‹ Package Contents
- One (1) Replacement Backlight (Model:PS600-BU00)
If this backlight is not appropriate for your GP/PS or does not function correctly,
please contact your local authorized GP/PS representative.
‹ Items Required When Changing The GP/PS's Backlight
- Phillips screwdriver (no. 2) for GP's rear cover attachment screws.
- One pair of clean (preferably new) cotton gloves.
GP/PS Model Name Backlight Model
PS600G Series
GP2600 Series
PS600-BU00
WARNINGS
• Be sure the GP/PS's power cord has been disconnected before changing
the backlight. When the GP/PS's power cord is connected and the GP/PS
is ON, high voltage runs through the wires in the backlight area - do not
touch them!
• When the GP/PS's power cord has just been disconnected, the backlight
area is still very hot! Be sure to wear gloves to prevent being burned.
• The backlight is very fragile. Do not touch the glass tube directly or try to
remove its power cord. If the glass tube breaks you may be injured.
Backlight Replacement Guide