Avaya 10U100 - Manual (Page 28)

27
appendix
E N G L I S H
b a s i c c a l l h a n d l i n g
Making a Conference Call
You can set up a conference call from a 10U100 Cordless Headset Telephone that
connects you up to two other outside parties and two inside parties together at the
same time. All rules and considerations regarding conference calling with PARTNER
telephones also apply to 10U100 units.
To add a second party to an existing call
You are connected with the first party:
• Press the button down once.
You hear intercom dial tone. The call of the first party is put on hold.
• To add an outside party, dial plus the outside number. If the number is busy
or does not answer, hang up or press and the first party will ring back.
To add an inside party, dial the 2-digit extension number. If the number is busy
or does not answer, press the button once and you will be reconnected to
the first party.
• When the second party (inside or outside) answers, press the button once.
You are now connected with both parties.
To drop the second added outside party from a conference call
You are connected with the first party:
• Press the button down once.
The last added party is dropped.
Speed Dialing
To dial a PARTNER Personal or System Speed Dial number:
• Press the button.
You hear intercom dial tone.
• Press plus the 2- or 3-digit Speed Dial code.
The system automatically selects an outside line and dials the Speed Dial number.
Note: You can’t program System Speed Dial numbers from a 10U100. It must be
done at extension 10.
To dial an outside number from the 10U100 speed dialer:
• Press the button.
You hear intercom dial tone.
• Dial .
You hear outside dial tone.
• Press followed by the desired single digit (0-9) memory location.
Your hear your number dialed.
mem
9
talk
#
talk
flash
flash
flash
talk
9
flash
60653-01 10U100 UserGuide_r2 5/11/01 12:12 AM Page 27