Asante Technologies SECURE NET 6001/P/W - Manual

NetServer 6001/P/W
Video Server
Quick Guide
SecureNET
©2007 Asante Networks Inc., All rights reserved. NetCam is a registered trademark of Asante Network, Inc. www.asante.com
Enter Username: “root”, Password: “root”
Step Enter the Main Page
Open A Microsoft Internet Exploer(IE) Window 1
.
Enter Camera IP address
Enter Home Camera Page
Enter Login Window
2
3
You Will Enter Home Page After Login
3
.
1 Install ActiveX
When the username and password are confirmed, a
control setup screen pops up under the IE address
bar. Click “Install ActiveX Control” to install the
controls.
2 The security warning screen aps.
Click Install.
Network Camera Live & Control Page 3
Step
The ActiveX is powered by Uniform Technologies and
You need to press Install to enable media viewer on
your IE browser ActiveX plug-in.
When ActiveX Plug-In is installed then you can view
video image. If you can not see, please select
streaming mode to HTTP.
Please refer to User Manual for detail operation.
Install Internet Explorer Plug-In Components
If No Video Image
You may need to check your PC environment including
(1) Window Firewall setting
(2) IE version should be 6.0 or above.
You may need to check router/firewall setting if you
view the video from the other side of router/firewall.
You may refer to user manual to learn this in depth.