PreSonus StudioLive 24.4.2 - Manual (Page 43)

39
4 Controls
4.1 The Fat Channel
StudioLive™ 24.4.2/16.4.2
Owner’s Manual
4.1.7 Loading Fat Channel Presets
The StudioLive comes with a suite of channel-strip presets created
by professional users of PreSonus products. These presets provide
a great jumping-off point to create a mix quickly and easily. The
StudioLive also allows you to create your own library of presets.
1. To load a preset to any channel on the StudioLive, first press the Select
button for the desired channel.
2. From the Fat Channel, press the Load button. You will notice that the LCD
now displays the Channel Preset Load menu.
3. The Channel Preset Load menu always displays the selected
channel onto which the preset will be loaded. Use the Value encoder
to locate the preset you would like to use.
4. Once you have made your selection, press the Recall button. If at any time
you would like to cancel this operation, simply press the Load button again.
Power User Tip: Load will stay active until you press the button again to disable
it, even if you select another channel. Because of this, you can quickly add a preset
to every channel and give yourself a jumping-off point to dial in your mix.
4.1.8 Saving Fat Channel Presets
If you have created a channel-strip setting in the Fat Channel that you would like to
save to the Channel Preset library, press the Fat Channel’s Save button. You will
notice that the LCD will display the Channel Preset Save menu.
1. To begin, use the Value encoder to scroll to an empty position in the
Channel Preset library.
2. Press the Next button to navigate to the category location. Create the
category in which your preset would fit (DRM, VOX, GTR, etc.).
3. Press the Next button again to navigate to the first letter of the preset
name.
4. Turn the Value encoder clockwise or counter-clockwise to change the letter.
The StudioLive allows you to customize the name with uppercase and
lowercase letters, as well as a selection of numerals and punctuation marks.
You can insert a space by simply pressing the Tap button.
5. Once you are satisfied with your changes, press the Store button. It will
illuminate while the Channel preset is being written to the StudioLive’s
internal memory. Once the Channel preset is saved, the Store button will
return to its unlit state.