PreSonus StudioLive 24.4.2 - Manual (Page 9)

5
2 Getting Started
2.1 Level Setting Procedure
StudioLive™ 24.4.2/16.4.2
Owner’s Manual
2. Connect the Main outs (TRS or XLR) of your StudioLive to
your power amplifier or powered monitors.
3. If you’re using passive speakers, connect them to your power
amplifier using speaker cable.
4. Bring down all the faders on your StudioLive to the ∞ setting.
5. Make sure that the Mic/Line knob on Channel 1
is all the way counter-clockwise.