Brocade Network Advisor SAN User Manual v12.1.0 User Manual
Brocade network advisor, San user manual
Advertising
Table of contents
Document Outline
- Contents
- About This Document
- Getting Started
- Licenses
- Patches
- Discovery
- SAN discovery overview
- FCS policy and seed switches
- Backbone Chassis discovery requirements
- Discovering fabrics
- Editing the password for multiple devices
- Configuring SNMP credentials
- Reverting to a default SNMP community string
- Rediscovering a fabric
- Removing a fabric from active discovery
- Rediscovering a previously discovered fabric
- Deleting a fabric
- Viewing the fabric discovery state
- Troubleshooting fabric discovery
- SAN Fabric monitoring
- SAN Seed switch
- Host discovery
- Discovering Hosts by Network address or host name
- Importing Hosts from a CSV file
- Importing Hosts from a Fabric
- Importing Hosts from a VM manager
- Editing Host adapter credentials
- Removing a host from active discovery
- Rediscovering a previously discovered fabric
- Deleting a host adapter from discovery
- Viewing the host discovery state
- Troubleshooting host discovery
- VM Manager discovery
- VM Manager discovery requirements
- Discovering a VM manager
- Editing a VM manager
- Excluding a host from VM manager discovery
- Including a host in VM manager discovery
- Removing a VM manager from active discovery
- Rediscovering a previously discovered VM manager
- Deleting a VM manager from discovery
- Viewing the VM manager discovery state
- Troubleshooting VM manager discovery
- SAN discovery overview
- Application Configuration
- Configurable preferences
- Server Data backup
- Server Data restore
- SAN display settings
- SAN End node display
- SAN Ethernet loss events
- Event storage settings
- Flyover settings
- Name settings
- Setting names to be unique
- Setting names to be non-unique
- Fixing duplicate names
- Viewing names
- Adding a name to an existing device
- Adding a name to a new device
- Applying a name to a detached WWN
- Removing a name from a device
- Editing names
- Exporting names
- Importing Names
- Searching for a device by name
- Searching for a device by WWN
- Miscellaneous security settings
- Syslog Registration settings
- SNMP Trap Registration settings
- SNMP Trap forwarding credential settings
- Software Configuration
- FIPS Support
- Fabric tracking
- User Account Management
- Users overview
- User accounts
- Creating a new user account
- Editing a user account
- Copying a user account
- Copying and pasting user preferences
- Assigning roles and areas of responsibility to a user account
- Removing roles and areas of responsibility from a user account
- Disabling a user account
- Enabling a user account
- Deleting a user account
- Unlocking a user account
- Roles
- Areas of responsibility
- Password policies
- Authentication Server Groups authorization on the Management server
- User profiles
- Dashboard Management
- Dashboard overview
- Dashboard toolbar
- Dashboard messages
- Dashboards expand navigation bar
- General dashboard functions
- Accessing a dashboard
- Filtering the dashboards list
- Creating a user-defined dashboard
- Deleting a user-defined dashboard
- Setting the dashboard display
- Customizing the dashboard widgets and monitors
- Exporting the dashboard display
- Printing the dashboard display
- Attaching and detaching the Dashboard tab
- Setting the network scope
- Creating a customized network scope
- Editing a user-defined network scope
- Deleting a user-defined network scope
- Setting the data display time frame
- Default dashboards
- Status widgets
- Monitoring and Alerting Policy Suite widgets
- Performance monitors
- Displaying monitors on the Performance Dashboard
- Top Port Alignment Errors monitor
- Top Port C3 Discards monitor
- Top Port C3 Discards RX TO monitor
- Top Port CRC Errors monitor
- Top Port Encode Error Out monitor
- Top Port Link Failures monitor
- Top Port Link Resets monitor
- Top Port Overflow Errors monitor
- Top Port Receive EOF monitor
- Top Port Runtime Errors monitor
- Top Port Sync Losses monitor
- Top Port Too Long Errors monitor
- Top Port Traffic monitor
- Top Port Underflow Errors monitor
- Top Port Utilization Percentage monitor
- Bottom Port Utilization Percentage monitor
- Top Product CPU Utilization monitor
- Top Product Memory Utilization monitor
- Top Product Response Time monitor
- Top Product Temperature monitor
- Top Products with Unused Ports monitor
- Editing a preconfigured performance monitor
- User-defined performance monitors
- Monitor types
- Measures
- Top or bottom product performance monitors
- Top or bottom port performance monitors
- Distribution performance monitors
- Time series performance monitors
- Configuring a user-defined product performance monitor
- Adding targets to a user-defined performance monitor
- Configuring a user-defined port performance monitor
- Viewing product distribution data details
- Viewing port distribution data details
- Configuring a monitor from a performance graph
- Traffic flow dashboard monitors
- Traffic flow monitor types
- Traffic flow measures
- Traffic flow performance graph monitor
- Top or bottom traffic flow performance monitor
- Time series traffic flow performance monitor
- Configuring a traffic flows monitor from a performance graph
- Configuring a user-defined traffic flow performance monitor
- Adding targets to a traffic flow performance monitor
- Dashboard overview
- View Management
- Call Home
- Call Home overview
- Viewing Call Home configurations
- Showing a Call Home center
- Hiding a Call Home center
- Editing a Call Home center
- Enabling a Call Home center
- Enabling supportSave
- Testing the Call Home center connection
- Disabling a Call Home center
- Viewing Call Home status
- Assigning a device to the Call Home center
- Removing a device from a Call Home center
- Removing all devices and filters from a Call Home center
- Defining an event filter
- Assigning an event filter to a Call Home center
- Assigning an event filter to a device
- Overwriting an assigned event filter
- Removing all event filter from a Call Home center
- Removing an event filter from a device
- Removing an event filter from the Call Home Event Filters list
- Searching for an assigned event filter
- Third-party tools
- About third-party tools
- Starting third-party tools from the application
- Launching a Telnet session
- Launching an Element Manager
- Launching Web Tools
- Launching FCR configuration
- Launching Name Server
- Launching HCM Agent
- Launching Fabric Watch
- Adding a tool
- Entering the server IP address of a tool
- Adding an option to the Tools menu
- Changing an option on the Tools menu
- Removing an option from the Tools menu
- Adding an option to a device’s shortcut menu
- Changing an option on a device’s shortcut menu
- Removing an option from a device’s shortcut menu
- Microsoft System Center Operations Manager (SCOM) plug-in
- Server Management Console
- Server Management Console overview
- Services tab
- Ports tab
- AAA Settings tab
- Configuring Radius server authentication
- Configuring LDAP server authentication
- Configuring TACACS+ server authentication
- Configuring Common Access Card authentication
- Configuring switch authentication
- Configuring Windows authentication
- Configuring local database authentication
- Displaying the client authentication audit trail
- Restore tab
- Technical Support Information tab
- HCM Upgrade tab
- SMI Agent Configuration Tool
- SAN Device Configuration
- Configuration repository management
- Saving switch configurations on demand
- Restoring a switch configuration for a selected device
- Scheduling switch configuration backup
- Restoring a configuration from the repository
- Viewing configuration file content
- Searching the configuration file content
- Deleting a configuration
- Exporting a configuration
- Importing a configuration
- Keeping a copy past the defined age limit
- Replicating configurations
- Replicating security configurations
- Enhanced group management
- Firmware management
- Frame viewer
- Ports
- Port commissioning overview
- Viewing existing CIMOM servers
- Registering a CIMOM server
- Editing CIMOM server credentials
- Importing CIMOM servers and credentials
- Exporting CIMOM servers and credentials
- Changing CIMOM server credentials
- Testing CIMOM server credentials
- Deleting CIMOM server credentials
- Decommissioning an F-Port
- Decommissioning an E-Port
- Decommissioning all ports on a switch
- Decommissioning all ports on a blade
- Recommissioning all ports on a switch
- Recommissioning all ports on a blade
- Port commissioning deployment report
- Administrative Domain-enabled fabric support
- Port Auto Disable
- Viewing Port Auto Disable status
- Configuring Port Auto Disable event triggers
- Enabling Port Auto Disable on individual ports
- Enabling Port Auto Disable on all ports on a device
- Disabling Port Auto Disable on individual ports
- Disabling Port Auto Disable on all ports on a device
- Stopping Port Auto Disable on a device
- Resuming Port Auto Disable on a device
- Unblocking ports
- Configuration repository management
- Host Port Mapping
- Storage Port Mapping
- In this chapter
- Storage port mapping overview
- Creating a storage array
- Adding storage ports to a storage array
- Unassigning a storage port from a storage array
- Reassigning mapped storage ports
- Editing storage array properties
- Deleting a storage array
- Viewing storage port properties
- Viewing storage array properties
- Importing storage port mapping
- Exporting storage port mapping
- Host Management
- Host management
- Brocade adapters
- HCM software
- Host adapter discovery
- VM Manager
- HCM and Management application support on ESXi systems
- Connectivity map
- View management
- Host port mapping
- Adapter software
- Bulk port configuration
- Adapter port WWN virtualization
- Role-based access control
- Host performance management
- Host security authentication
- supportSave on adapters
- Host fault management
- Backup support
- Fibre Channel over Ethernet
- In this chapter
- FCoE overview
- Enhanced Ethernet features
- FCoE protocols supported
- FCoE licensing
- Saving running configurations
- DCB configuration management
- Switch policies
- DCB configuration
- QoS configuration
- FCoE provisioning
- VLAN classifier configuration
- LLDP-DCBX configuration
- 802.1x authentication
- Switch, port, and LAG deployment
- DCB performance
- FCoE login groups
- Virtual FCoE port configuration
- Security Management
- FC-FC Routing Service Management
- Virtual Fabrics
- Virtual Fabrics overview
- Virtual Fabrics requirements
- FICON best practices for Virtual Fabrics
- Configuring Virtual Fabrics
- Enabling Virtual Fabrics
- Disabling Virtual Fabrics
- Creating a logical switch or base switch
- Finding the physical chassis for a logical switch
- Finding the logical switch from a physical chassis
- Assigning ports to a logical switch
- Removing ports from a logical switch
- Deleting a logical switch
- Configuring fabric-wide parameters for a logical fabric
- Applying logical fabric settings to all associated logical switches
- Moving a logical switch to a different fabric
- Changing a logical switch to a base switch
- SAN Encryption Configuration
- Encryption Center features
- Encryption user privileges
- Smart card usage
- Using authentication cards with a card reader
- Registering authentication cards from a card reader
- Registering authentication cards from the database
- Deregistering an authentication card
- Setting a quorum for authentication cards
- Using system cards
- Enabling or disabling the system card requirement
- Registering system cards from a card reader
- Deregistering system cards
- Using smart cards
- Tracking smart cards
- Editing smart cards
- Network connections
- Blade processor links
- Encryption node initialization and certificate generation
- Key Management Interoperability Protocol
- Supported encryption key manager appliances
- Steps for connecting to a DPM appliance
- Exporting the KAC certificate signing request (CSR)
- Submitting the CSR to a certificate authority
- KAC certificate registration expiry
- Importing the signed KAC certificate
- Uploading the CA certificate onto the DPM appliance (and first-time configurations)
- Uploading the KAC certificate onto the DPM appliance (manual identity enrollment)
- DPM key vault high availability deployment
- Loading the CA certificate onto the encryption group leader
- Steps for connecting to an LKM/SSKM appliance
- Steps for connecting to an ESKM/SKM appliance
- Configuring a Brocade group on ESKM/SKM
- Registering the ESKM/SKM Brocade group user name and password
- Setting up the local Certificate Authority (CA) on ESKM/SKM
- Downloading the local CA certificate from ESKM/SKM
- Creating and installing the ESKM/SKM server certificate
- Enabling SSL on the Key Management System (KMS) Server
- Creating an ESKM/SKM High Availability cluster
- Copying the local CA certificate for a clustered ESKM/SKM appliance
- Adding ESKM/SKM appliances to the cluster
- Signing the encryption node KAC certificates
- Importing a signed KAC certificate into a switch
- ESKM/SKM key vault high availability deployment
- Data Encryption Keys
- ESKM/SKM key vault deregistration
- Steps for connecting to a TEKA appliance
- Steps for connecting to a TKLM appliance
- Exporting the Fabric OS node self-signed KAC certificates
- Converting the KAC certificate format
- Establishing a default key store and device group on TKLM
- Adding a device to the device group
- Creating a self-signed certificate for TKLM
- Importing the Fabric OS encryption node KAC certificates to TKLM
- Exporting the TKLM self-signed server certificate
- Importing the TKLM certificate into the group leader
- Steps for connecting to a KMIP-compliant SafeNet KeySecure
- Setting FIPS compliance
- Creating a local CA
- Creating a server certificate
- Creating a cluster
- Configuring a Brocade group on the KeySecure
- Registering the KeySecure Brocade group user name and password
- Signing the encryption node KAC CSR on KMIP
- Importing a signed KAC certificate into a switch
- Backing up the certificates
- Configuring the KMIP server
- Adding a node to the cluster
- Steps for connecting to a KMIP-compliant keyAuthority
- Encryption preparation
- Creating a new encryption group
- Configuring key vault settings for RSA Data Protection Manager (DPM)
- Configuring key vault settings for NetApp Link Key Manager (LKM/SSKM)
- Configuring key vault settings for HP Enterprise Secure Key Manager (ESKM/SKM)
- Configuring key vault settings for Thales e_Security keyAuthority (TEKA)
- Configuring key vault settings for IBM Tivoli Key Lifetime Manager (TKLM)
- Configuring key vault settings for Key Management Interoperability Protocol
- Understanding configuration status results
- Adding a switch to an encryption group
- Replacing an encryption engine in an encryption group
- High availability clusters
- Configuring encryption storage targets
- Configuring hosts for encryption targets
- Adding target disk LUNs for encryption
- Adding target tape LUNs for encryption
- Moving targets
- Configuring encrypted tape storage in a multi-path environment
- Tape LUN write early and read ahead
- Tape LUN statistics
- Encryption engine rebalancing
- Master keys
- Active master key
- Alternate master key
- Master key actions
- Saving the master key to a file
- Saving a master key to a key vault
- Saving a master key to a smart card set
- Restoring a master key from a file
- Restoring a master key from a key vault
- Restoring a master key from a smart card set
- Creating a new master key
- Security settings
- Zeroizing an encryption engine
- Using the Encryption Targets dialog box
- Redirection zones
- Disk device decommissioning
- Rekeying all disk LUNs manually
- Thin provisioned LUNs
- Viewing time left for auto rekey
- Viewing and editing switch encryption properties
- Viewing and editing encryption group properties
- Encryption-related acronyms in log messages
- Zoning
- Zoning overview
- Zone database size
- Zoning configuration
- Configuring zoning
- Creating a zone
- Viewing zone properties
- Adding members to a zone
- Creating a member in a zone
- Removing a member from a zone
- Renaming a zone
- Deleting a zone
- Duplicating a zone
- Customizing the zone member display
- Enabling or disabling the default zone for fabrics
- Creating a zone alias
- Editing a zone alias
- Removing an object from a zone alias
- Exporting zone aliases
- Renaming a zone alias
- Deleting a zone alias
- Duplicating a zone alias
- Creating a zone configuration
- Viewing zone configuration properties
- Adding zones to a zone configuration
- Removing a zone from a zone configuration
- Activating a zone configuration
- Deactivating a zone configuration
- Renaming a zone configuration
- Deleting a zone configuration
- Duplicating a zone configuration
- Creating an offline zone database
- Deleting an offline zone database
- Refreshing a zone database
- Merging fabrics
- Merging two zone databases
- Creating a common active zone configuration in two fabrics
- Saving a zone database to a switch
- Exporting an offline zone database
- Importing an offline zone database
- Rolling back changes to the offline zone database
- LSAN zones
- LSAN tagging
- Traffic Isolation zones
- Failover options
- Enhanced TI zones
- Configuring Traffic Isolation zoning
- Creating a Traffic Isolation zone
- Adding members to a Traffic Isolation zone
- Enabling a Traffic Isolation zone
- Disabling a Traffic Isolation zone
- Enabling failover on a Traffic Isolation zone
- Disabling failover on a Traffic Isolation zone
- Boot LUN zones
- Zoning administration
- Comparing zone databases
- Managing zone configuration comparison alerts
- Setting change limits on zoning activation
- Clearing the fabric zone database
- Removing all user names from a zone database
- Finding a member in one or more zones
- Finding a zone member in the potential member list
- Finding zones in a zone configuration
- Finding a zone configuration member in the zones list
- Listing zone members
- Listing un-zoned members
- Removing an offline device
- Replacing zone members
- Replacing an offline device by WWN
- Replacing an offline device by name
- Fibre Channel over IP
- FCIP services licensing
- FCIP Concepts
- IP network considerations
- FCIP platforms and supported features
- FCIP trunking
- Adaptive Rate Limiting
- QoS SID/DID priorities over an FCIP trunk
- IPsec and IKE implementation over FCIP
- QOS, DSCP, and VLANs
- Open systems tape pipelining
- FICON emulation features
- Connecting cascaded FICON fabrics over FCIP
- FCIP configuration guidelines
- Configuring an FCIP tunnel
- Adding an FCIP circuit
- Configuring FCIP tunnel advanced settings
- Viewing FCIP connection properties
- Viewing General FCIP properties
- Viewing FCIP port properties
- Editing FCIP circuits
- Disabling FCIP tunnels
- Enabling FCIP tunnels
- Deleting FCIP tunnels
- Disabling FCIP circuits
- Enabling FCIP circuits
- Deleting FCIP Circuits
- Displaying FCIP performance graphs
- Displaying tunnel properties from the FCIP tunnels dialog box
- Displaying FCIP circuit properties from the FCIP tunnels dialog box
- Displaying switch properties from the FCIP Tunnels dialog box
- Displaying fabric properties from the FCIP Tunnels dialog box
- Troubleshooting FCIP Ethernet connections
- Fabric Binding
- Port Fencing
- In this chapter
- About port fencing
- Thresholds
- Adding thresholds
- Editing thresholds
- Editing a C3 Discard Frames threshold
- Editing an Invalid CRCs threshold
- Editing an Invalid Words threshold
- Editing a Link Reset threshold
- Editing a Protocol Error threshold
- Editing a State Change threshold
- Finding assigned thresholds
- Viewing thresholds
- Viewing all thresholds on a specific Fabric OS device
- Removing thresholds
- FICON Environments
- FICON configurations
- Configuring a switch for FICON operation
- Configuring FICON display
- Configuring an Allow/Prohibit Matrix
- Configuring an Allow/Prohibit Matrix manually
- Saving or copying Allow/Prohibit Matrix configurations to another device
- Activating an Allow/Prohibit Matrix configuration
- Deleting an Allow/Prohibit Matrix configuration
- Changing the Allow/Prohibit Matrix display
- Cascaded FICON fabric
- Cascaded FICON fabric merge
- Port groups
- Swapping blades
- VLAN Management
- Deployment Manager
- Introduction to the Deployment Manager
- Editing a deployment configuration
- Duplicating a deployment configuration
- Deleting a deployment configuration
- Deploying a configuration
- Viewing deployment logs
- Generating a deployment report
- Generating a deployment configuration snapshot report
- Searching the configuration snapshots
- Fibre Channel Troubleshooting
- Performance Data
- SAN performance overview
- SAN real-time performance data
- SAN historical performance data
- Enabling SAN-wide historical performance collection
- Enabling historical performance collection for selected fabrics
- Disabling historical performance collection
- Generating and saving a historical performance graph
- Exporting historical performance data
- Deleting a favorite graph configuration
- Performance database views
- How to extract performance statistics data from the database
- SAN end-to-end monitoring
- SAN Top Talker monitoring
- For systems using Fabric OS version 7.2 or later, when you select a device or device port, and then select Monitor > Performance > Top Talkers, a message displays that you can use Flow Vision to provide Top Talkers monitoring. You have these options:
- Configuring a fabric mode Top Talker monitor
- Configuring an F_Port mode Top Talker monitor
- Deleting a Top Talker monitor
- Pausing a Top Talker monitor
- Restarting a Top Talker monitor
- Bottleneck detection
- Supported configurations for bottleneck detection
- How bottlenecks are reported
- Limitations of bottleneck detection
- Enabling bottleneck alerts and configuring alert parameters
- Inheriting alert parameters from a switch
- Copying alert parameters from one switch or port to another
- Displaying bottleneck statistics
- Displaying devices that could be affected by an F_Port or FL_Port bottleneck
- Disabling bottleneck detection
- Thresholds and event notification
- SAN connection utilization
- Flow Vision
- Overview
- Provisioning flows
- Monitoring Flows
- Dashboard flow performance monitor
- Flow Vision features
- Context-based flow definitions
- Flow parameter and configuration rules and limitations
- Accessing Flow Vision from other management application features
- Frame Viewer
- MAPS
- Bottleneck Detection
- Trace route and ping
- Port connectivity
- Top Talkers
- For systems using Fabric OS version 7.2 or later, when you select a device or device port, and then select Monitor > Performance > Top Talkers, a message displays that you can use Flow Vision to provide Top Talkers monitoring. You have these options:
- End-to-End Monitors
- Frame Monitor
- Policy Monitor
- Policy monitor overview
- Preconfigured policy monitors
- Viewing policy monitor status
- Viewing existing policy monitors
- Adding a policy monitor
- Policy monitor scheduling
- Editing a policy monitor
- Deleting a policy monitor
- Running a policy monitor
- Viewing a policy monitor report
- Exporting reports to e-mail recipients
- Viewing historical reports for all policy monitors
- Viewing historical reports for a policy monitor
- Fault Management
- Fault management overview
- Event notification
- Defining filters
- SNMP traps
- SNMP informs
- Syslogs
- Event action definitions
- Pseudo events
- Displaying pseudo event definitions
- Creating pseudo event definitions
- Setting pseudo event policies
- Filtering pseudo event traps
- Creating a pseudo event definition by copying an existing definition
- Editing a pseudo event definition
- Deleting a pseudo event definition
- Adding a pseudo event on the escalation policy
- Creating an event action with a pseudo event on the escalation policy
- Adding a pseudo event on the resolving policy
- Creating an event action with a pseudo event on the resolving policy
- Adding a pseudo event on the flapping policy
- Creating an event action with a pseudo event on the flapping policy
- Event custom reports
- Event custom report schedules
- Event logs
- Viewing event logs
- Copying part of a log entry
- Copying an entire log entry
- Exporting the entire log
- E-mailing all event details from the Master Log
- E-mailing selected event details from the Master Log
- Displaying event properties from the Master Log
- Copying part of the Master Log
- Copying the entire Master Log
- Exporting the Master Log
- Filtering events in the Master Log
- Monitoring and Alerting Policy Suite
- Monitoring and Alerting Policy Suite overview
- MAPS interoperability with other features
- MAPS category, object, and measure hierarchy
- MAPS monitoring categories
- MAPS policies
- MAPS rules
- MAPS conditions
- MAPS actions
- Fence
- SNMP traps
- Enabling or disabling policy actions for all policies
- Configuring e-mail notification
- Viewing MAPS policy data
- Configuring a MAPS policy
- Editing a MAPS policy
- Cloning a MAPS policy
- Importing Flow definitions
- Removing imported Flows
- Activating a MAPS policy
- Replicating a policy to other devices
- Exporting a MAPS policy
- Importing a MAPS policy
- Deleting a MAPS policy
- Viewing MAPS policy rules
- MAPS groups
- MAPS violations
- MAPS events
- MAPS integration with other features
- Technical Support
- In this chapter
- Server and client support save
- Device technical support
- Scheduling technical support information collection
- Starting immediate technical support information collection
- Viewing the technical support repository
- Saving technical support information to another location
- E-mailing technical support information
- Copying technical support information to an external FTP server
- Deleting technical support files from the repository
- Upload failure data capture
- Reports
- Application menus
- Call Home Event Tables
- Event Categories
- User Privileges
- Device Properties
- Regular Expressions
- Troubleshooting
- In this chapter
- Application Configuration Wizard troubleshooting
- Browser troubleshooting
- Client browser troubleshooting
- Fabric tracking troubleshooting
- FICON troubleshooting
- Firmware download troubleshooting
- Launch Client troubleshooting
- Names troubleshooting
- Patch troubleshooting
- Performance troubleshooting
- Port Fencing troubleshooting
- Professional edition login troubleshooting
- Server troubleshooting
- Server Management Console troubleshooting
- Supportsave troubleshooting
- Technical support data collection troubleshooting
- View All list troubleshooting
- Wireless troubleshooting
- Zoning troubleshooting
- Database Fields
- In this appendix
- Database tables and fields
- Views
- ADAPTER_PORT_CONFIG_INFO
- AG_CONNECTION_INFO
- BOOT_IMAGE_FILE_DETAILS_INFO
- CNA_ETH_PORT_CONFIG_INFO
- CNA_PORT_DETAILS_INFO
- CNA_PORT_INFO
- CORE_SWITCH_DETAILS_INFO
- CRYPTO_HOST_LUN_INFO
- CRYPTO_TARGET_ENGINE_INFO
- DASHBOARD_PREFERENCES_INFO
- DEPLOYMENT_INFO
- DEPLOYMENT_LOG
- DEVICE_CONNECTION_INFO
- EE_MONITOR_STATS_5MIN_INFO
- EE_MONITOR_STATS_30MIN_INFO
- EE_MONITOR_STATS_2HOUR_INFO
- EE_MONITOR_STATS_1DAY_INFO
- TE_PORT_STATS_5MIN_INFO
- TE_PORT_STATS_30MIN_INFO
- TE_PORT_STATS_2HOUR_INFO
- TE_PORT_STATS_1DAY_INFO
- SWITCH_INFO
- DEVICE_INFO
- N2F_PORT_MAP_INFO
- DEVICE_NODE_INFO
- DEVICE_PORT_INFO
- DEV_PORT_GIGE_PORT_LINK_INFO
- DEV_PORT_MAC_ADDR_MAP_INFO
- ISL_CONNECTION_INFO
- ISL_INFO
- ETHERNET_ISL_INFO
- EVENT_DETAILS_INFO
- EVENT_INFO
- FABRIC_INFO
- FCIP_TUNNEL_CIRCUIT_INFO
- FCIP_TUNNEL_INFO
- FCOE_DEVICE_INFO
- FRU_INFO
- GIGE_PORT_ECLOUD_LINK_INFO
- GIGE_PORT_INFO
- HBA_PORT_DETAILS_INFO
- HBA_TARGET_INFO
- HEALTH_STATUS_INFO
- HOST_DISCOVERY_REQUEST_INFO
- IFL_INFO
- ISL_INFO
- ISL_TRILL_INFO
- ISL_TRUNK_GROUP_MEMBER_INFO
- ISL_TRUNK_INFO
- L2_NEIGHBOR_INFO
- MAPS_EVENT_DETAILS_INFO
- MODULE_INFO
- NPORT_WWN_MAP_INFO
- PHANTOM_PORT_INFO
- PRODUCT_INFO
- PORT_BOTTLENECK_CONF_INFO
- PORT_BOTTLENECK_STAT_INFO
- PORT_GROUP_INFO
- ROLE_PRIVILEGE_INFO
- PORT_PROFILE_INFO
- PORT_PROFILE_INTERFACE_INFO
- PORT_PROFILE_MAC_INFO
- PORT_VLAN_INFO
- SFLOW
- SFLOW_MINUTE_L3_VIEW
- SFLOW_MINUTE_MAC_VIEW
- SCOM_EE_MONITOR_INFO
- SENSOR_INFO
- SMART_CARD_USAGE_INFO
- SWITCH_CONFIG_INFO
- SWITCH_DETAILS_INFO
- SWITCH_DISCOVERED_MAC_INFO
- SWITCH_PORT_INFO
- SWITCH_SNMP_INFO
- TIME_SERIES_DATA_INFO
- TIME_SERIES_DATA_VIEW
- TRILL_INFO
- TRILL_TRUNK_INFO
- USER_ROLE_RESOURCE_INFO
- VIRTUAL_FCOE_PORT_INFO
- VIRTUAL_PORT_WWN_DETAILS_INFO
- VM_ADDRESS_INFO
- VM_CONNECTIVITY_INFO
- VM_DATASTORE_DETAILS_INFO
- VM_EE_MONITOR_INFO
- VM_HOST_INFO
- VM_LUN_INFO
- VM_STATISTICS_INFO
- VR_CONN_MODULE_INFO
- VR_CONN_MODULE_PORT_INFO
- VR_CONN_NPIV_INFO
- VMM_DISCOVERED_MAC_INFO
- VM_VIRTUAL_ETHERNET_ADAPTER_INFO
- ZONE_DB_INFO
- PHYSICAL_DEVICE_INFO
- SLOT_INFO
- MANAGED_ELEMENT_INFO
- SNMP_DATA_INFO
- SNMP_EXPR_DATA_INFO
- SNMP_DATA_VIEW
- VM_VNETWORK_INFO
- VCS_CLUSTER_MEMBER_INFO
- RESET_VCS_LICENSED
- TRILL_TRUNK_INFO
- WIRELESS_INTERFACE
- WIRED_INTERFACE
- CEE_PORT_INFO
- Index