Accusys eXpeRAID - Manual (Page 12)

ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE
REV. G–05-NOV-2007 PAGE 12 OF 27
3.3 CLI Command Set
3.3.1 Basic CLI Commands
3.3.1.1
Command Name Command Description
Use this command to show the main information page, which lists all
available CLI commands with brief descriptions.
Parameter Description
Main
N/A
3.3.1.2
Command Name Command Description
CtrlIndex Use this command to set a specified controller to be active. The default
controller will be set to controller 0 if it exists.
Parameter 1 Parameter Description
Controller index:
<0~n> Controller index:
<0~n>, where n stands for the maximum index number of the available
controller(s).
3.3.1.3
Command Name Command Description
CheckPassword Use this command to verify password of the active controller. The
controller commands can only be issued after the password being
verified.
Parameter 1 Parameter Description
Password:
CHARS must be an 8-character alphabetic string.
Example
Password:
<CHARS>
CLI>CheckPassword 00000000 [Enter]
If 00000000 is a correct password for the active controller, then CLI
will return success and the controller can receive commands normally
after that.