Accusys eXpeRAID - Manual (Page 18)

ACCUSYS, INC.
5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT “DESKTOP RAID” DOCUMENT STATUS OFFICIAL RELEASE
REV. G–05-NOV-2007 PAGE 18 OF 27
3.3.3.6
Command Name Command Description
SetLunMap Use this command to set a Lun Map for an existing slice or JBOD.
Parameter 1 Parameter Description
LUN No.:
<Lun=<0~63>>
Parameter 2
Array No.:
<Array=<1~4>:
JBOD= <1~n>>
Parameter 3
LUN No.:
Specify the Lun number to be mapped.
Array No.:
Array =1~4, Maps Lun to a specified Array
JBOD=1~n, Maps Lun to a specified JBOD
Slice No.:
This parameter is not needed when parameter 2 uses JBOD.
Example
CLI>SetLunMap Lun=0 JBOD=1 [Enter]
Lun 0 will be mapped to JBOD1 if it exists.
Slice No.:
<Slice= <0~15>>
CLI>SetLunMap Lun=0 Array=1 Slice=0 [Enter]
Lun 0 will be mapped to slice 0 of array 1 if it exists.
3.3.3.7
Command Name Command Description
DeleteLunMap Use this command to delete an existing Lun Map.
Parameter 1 Parameter Description
LUN No.:
<0~63> Lun No.:
Specify the Lun number to be unmapped.