HATZ Diesel 4M42 - Manual (Page 32)

Depending on the use and installation of the engine, it may be necessary for
the machine manufacturer and machine user to install safety equipment to
prevent inappropriate use. Note the following:
▪ Parts of the exhaust gas system and the engine surface become hot dur-
ing operation and may not be touched until they cool down after the en-
gine is switched off.
▪ Incorrect cable connections and incorrect operation of the electrical equip-
ment can lead to sparking and must be avoided.
▪ After the engine is installed in the machine, rotating parts must be protect-
ed against contact.
HATZ safety equipment is available for the belt drive of the cooling fan and
alternator.
▪ Comply with all notice and warning labels on the engine and keep them in
a legible condition. If a label should become detached or be difficult to
read, it must be replaced promptly. For this purpose, contact your nearest
HATZ service station.
▪ Any improper modification of the engine results in a loss of liability cover-
age for resulting damage.
Only regular maintenance, as specified in this Operator's Manual, will main-
tain the operating readiness of the engine.
The assembly instructions contain important information on how to safely as-
semble the engine. They are available from any Hatz service station.
If you have any questions, please contact your nearest HATZ service sta-
tion before commissioning the engine.
6.3 Preparations for commissioning
▪ Check the delivered parts for completeness, damage and other noticeable
issues.
▪ Ensure that the setup location is adequately ventilated.
DANGER
Danger to life from inhaling exhaust gases.
Toxic engine exhaust gases can lead to loss of consciousness
and even death in closed-off and poorly ventilated rooms.
▪ Never operate the machine in closed-off or poorly ventilated
rooms.
▪ Do not breathe in the exhaust gases.
Transport, assembly and commissioning 2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42
32 Operator's Manual HATZ