HATZ Diesel 4M42 - Manual (Page 37)

7.4 Setting the speed control
Overview
Procedure
Step Activity
1 Depending on the possibility or requirement, place the
speed control lever in either the "1/2" or "Start" position.
NOTICE
i
A lower speed setting will cause less exhaust smoke when start-
ing.
7.5 Starting the engine
Starting options
The standard equipment of the engine is an electric start mechanism. A
hand starter can be installed as an option.
If possible, separate the engine from the machine being driven by uncou-
pling it. Always switch the machine into idle mode.
2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42 Operation and use
HATZ Operator's Manual 37