HATZ Diesel 4M42 - Manual (Page 66)

Pos. Designation
1 Dipstick
2 Mark on the dipstick
Adding oil
Step Activity
1 Add engine oil to the max. mark on the dipstick (1).
▪ For the specification and viscosity, see the chapter 4.3 En-
gine oil, page 24.
▪ The mark of the dipstick (2) indicates whether the engine is
equipped with an oil sump or not (see the chapter 4.1 En-
gine, page 22).
2 Reinsert the dipstick (1).
3 Check the oil level after a short test run and correct if necessa-
ry.
8.2.6 Cleaning the cooling fan, cooling fins and oil cooler
Safety notes
DANGER
Danger of explosion from flammable cleaning agents.
Cleaning with benzene is an explosion hazard. It is highly flam-
mable, can become electrostatically charged and can generate
an explosive gas-air mixture.
▪ Use halogen-free, cold cleaners with a high flashpoint for
cleaning.
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine.
▪ Let the engine cool before maintenance.
Maintenance 2-4L41C, 2-4M41, 2-4M41Z, 4L42C, 4M42
66 Operator's Manual HATZ