Hired-Hand Super-Savers (Forced Air Heaters) XL: Deluxe T-Duct Installation - Manual

Bend large piece
along perforations
to make the shape
at far right.
Deluxe T-Duct Installation
Attach the two smaller
pieces as shown with
sheet metal screws
provided.
Completed Deluxe T-Duct
Attach the T-Duct to
the heater outlet
with four sheet metal
screws. The duct
attaches here.
This illustration shows a cut out pattern
on the bottom of the duct. Make sure
when the duct is attached to the heater,
this pattern faces down.
This piece may be used to direct some
of the heat downward. Cut the two sections
marked above and tilt the deflector up by
hand.
HHI P/N 4801-0114