Johnson Level & Tool Mfg. 40-6222 - Manual

12101 Arch St., Little Rock, AR 72206 Toll Free (800) 598.5973, (501) 562.0900, (501) 562.0022 – Facsimile
Please visit our
website! WWW.lasertoolsco.com
L58AC and L58DC Industrial Alignment Laser Operating Instructions
The L58 Module is designed so that the beam is on the centerline of the
tube, the Model L58 alignment laser is used for point-to-point alignment,
precise layout and positioning, line generator and pointing applications, site
layouts and Industrial Machine control. The L58 is built for harsh and
hazardous environments.
Features:
• Solid Brass Construction - Won’t rust or spark
• “O” Ring Seal - Water and Oil Proof to IP67 Standards (1 M for 10
sec.)
• Laser Beam Concentric to O.D. - Easy to align using outside of tube for
reference.
• Beam on Indicator – Verify unit is working from a distance.
• Use as a Laser Chalk Line – Shoot a vertical or horizontal line.
• Large 6 mm Glass Optics – 20 times brighter than standard lasers.
Optional Accessories:
Soft Shell Case and Laser Chalk Line Optics
Interchangeable apertures – Dot size can be adjusted without changing the
dot position or realigning the tube.
Specifications: Model L58AC and L58DC
Dimensions: 3 ¼”(82.55mm)L x ¾”(19mm) Diameter
Weight: 6oz (Excluding Transformer)
Power: 110 VAC or 4-24V DC at 50mA. Class IIIa @ 635nm
Beam Divergence: <.4mrad.
Note: 1. Do not remove the power transformer from the Model L58AC
Industrial Alignment Module and connect to alternate power or chassis
ground.
2. The shield wire on the power cable is connected to the brass housing.
3. For L58DC Power Connection – White or Black wire (Negative and
Brass Case), Blue or Red wire (Positive). Do not exceed 24 Volts DC.
4. The laser module is polarity reversal protected.
Manufactured by: Laser Tools Co., Inc. 12101 Arch St., Little Rock, AR
72206