Johnson Level & Tool Mfg. 1887-0000 User Manual

Instruction manual, Mode d'emploi, Manual de instrucciones

Advertising
background image

Digital Depth Gauge

Model No. 1887-0000

Instruction Manual

Congratulations on your choice of this Digital Depth Gauge. We
suggest you read this instruction manual thoroughly before using the
instrument. Save this instruction manual for future use.

Table of Contents

1. Kit Contents

Description

Qty.

3V CR2032 Lithium Battery

1

Instruction Manual

1

Depth Pin

1

2. Features and Functions

• Large easy to read digital LCD display
• Measurements are displayed in: Inches in Decimal,

Inches in Fraction and Millimeters with the push of a button

• Measures in both absolute and incremental modes
• Automatic shut off after 5 minutes without use
• Measuring scale with locking knob to lock the scale at

desired measurement

• Free standing magnetic base
• Depth pin for measuring holes

1. Kit Contents
2. Features and Functions
3. Location of Parts/Components
4. Operating Instructions

5. Using the Product
6. Technical Specifications
7. Care and Handling
8. Product Warranty

Scale

Battery
Compartment

LCD Display

Locking Knob

INC/ABS Button

Gauge Body

Depth Pin

mm/inch/fraction
Button

On/Off Button

4. Operating Instructions

Battery Installation
1. Make sure the Digital Depth Gauge is turned off.
2. To install or replace the battery, locate the battery

compartment cover located above the LCD (see figure 1).

3. Pull the battery compartment out of the Digital Depth Gauge housing

(see figure 2).

4. Install the new

battery with the
negative pole facing
up (see figure 3).

5. Push the battery

compartment back into
the Digital Depth Gauge

housing until it is flush with the top of the housing (see figure 4).

Note: Always remove the battery before storing the instrument.

3. Location of Part/Components

©2013 Johnson Level & Tool

©2013 Johnson Level & Tool

©2013 Johnson Level & Tool

5. Using the Product

On/Off Button
1. Push the on/off button once to turn the unit on. ABS

(absolute mode) will be displayed at the top of the LCD.

2. Another press of the on/off button with the unit on will set the

LCD display to zero.

3. After approximately 5 minutes of no movement or button

push, the until will shut off automatically. To restart the unit,
push the on/off button once.

Battery
Compartment
Cover

Pull Up

Push
Down

Negative Pole

Jauge de profondeur numérique

Modèle n

o

1887-0000

Mode d'emploi

Nous vous félicitons d'avoir choisi cette jauge de profondeur
numérique. Nous vous suggérons de lire attentivement ce mode
d'emploi avant d'utiliser cet appareil. Conservez ce mode d'emploi
pour pouvoir vous y référer ultérieurement.

Table des matières

1. Contenu de la trousse

Description

Qté

Pile au lithium CR2032 3 V

1

Mode d'emploi

1

Aiguille de profondeur

1

2. Caractéristiques et fonctions

• Grand affichage numérique facile à lire
• Mesures affichées en pouces en décimales, en pouces en

fractions, et en millimètres en appuyant sur une touche

• Mesures en modes incrémentiel et absolu
• Arrêt automatique après 5 minutes sans utilisation
• Règle de mesure avec bouton de verrouillage permettant

de verrouiller la règle à la mesure désirée

• Base magnétique autoportante
• Aiguille de profondeur incluse pour mesurer les trous

1. Contenu de la trousse
2. Caractéristiques et fonctions
3. Emplacement des pièces et

composants

4. Consignes d'utilisation

5. Utilisation de l'appareil
6. Spécifications techniques
7. Entretien et manipulation
8. Garantie du produit

Règle

Compartiment
de la pile

Écran à CL

Bouton de verrouillage

Touche «INC/ABC»

Corps de la jauge

Aiguille de profondeur

Touche
«mm/inch/fraction»

Touche
marche/arrêt
(ON/OFF)

4. Consignes d'utilisation

Insertion de la pile
1. Assurez-vous que la jauge de profondeur numérique est éteinte.
2. Pour insérer ou remplacer la pile, repérez le couvercle du

compartiment de la pile situé au-dessus de l'écran (voir figure 1).

3. Retirez le compartiment de la pile du corps de la jauge de profondeur

numérique en tirant (voir figure 2).

4. Insérez la nouvelle pile

en orientant le pôle
négatif vers le haut
(voir figure 3).

5. Insérez le compartiment

de la pile dans la jauge de
profondeur numérique et
appuyez pour que le compartiment ne dépasse plus de l'écran (voir figure 4).

Remarque : Retirez toujours la pile avant de ranger l'appareil.

3. Emplacement des pièces et composants

5. Utilisation de l'appareil

Touche marche/arrêt (On/Off)
1. Appuyez une fois sur la touche marche/arrêt pour mettre

l'appareil en marche. «ABS» (mode absolu) apparaîtra dans le
haut de l'écran.

2. Si vous appuyez de nouveau sur la touche marche/arrêt alors

que l'appareil est en marche, l'affichage sera réglé à zéro.

3. L'appareil s'éteindra automatiquement s'il demeure

immobile ou si aucune touche n'est actionnée pendant
environ 5 minutes. Pour remettre l'appareil en marche,
appuyez une fois sur la touche marche/arrêt.

Couvercle du
compartiment
de la pile

Tirez vers
le haut

Appuyez
vers le
bas

Pôle négatif

4. Instrucciones de operación

Instalación de la batería
1. Asegúrese de que el instrumento está apagado
2. Para instalar o reemplazar la batería, ubique la cubierta del

compartimiento de la batería que se encuentra arriba de la
pantalla LCD. (Figura 1)

3. Retire el compartimiento (Figura 2).
4. Instale la batería

nueva con el polo
negativo hacia arriba
(Figura 3).

5. Inserte el compar-

timiento en su sitio
hasta que quede bien

ajustado (Figura 4).

Nota: Retire siempre la batería antes de guardar el instrumento.

Cubierta del
compar-
timiento de la
batería

Hale

Presione

Polo negativo

Medidor digital de profundidad

Modelo 1887-0000

Manual de instrucciones

Felicitaciones por la compra de este medidor digital de profundidad. Le
sugerimos leer detenidamente y en su totalidad este manual antes de
utilizar el instrumento. Guarde este manual para consultarlo en el futuro.

Tabla de contenido

1. Contenido del kit

Descripción

Cantidad

Batería de litio CR2032 3V

1

Manual de instrucciones

1

Varilla de profundidad

1

2. Características y funciones

• Pantalla LCD digital grande para fácil lectura
• Lectura de medidas en décimas de pulgada, fracciones de

pulgada y milímetros con sólo presionar un botón

• Medidas en modos absoluto e incremental
• Apagado automático después de 5 minutos de no utilizar

el instrumento

• Reglilla de medición con mecanismo de bloqueo para

bloquear la reglilla en la medida deseada

• Base magnética autónoma
• Varilla de profundidad para medir agujeros (incluida)

1. Contenido del kit
2. Características y funciones
3. Ubicación de partes / componentes
4. Instrucciones de operación

5. Utilización del producto
6. Especificaciones técnicas
7. Cuidado y manejo
8. Garantía del producto

Reglilla

Compartimiento
de batería

Pantalla LCD

Perilla de bloqueo

Botón INC/ABC

Cuerpo del medidor

Varilla de profundidad

Botón mm/pulgada/
fracciones

Botón de encen-
dido/apagado

3. Ubicación de partes / componentes

5. Utilización del producto

Botón de encendido/apagado
1. Presione una vez el botón de encendido/apagado. El modo

absoluto ABS aparecerá en la parte superior de la pantalla LCD.

2. Con la unidad encendida, presione el botón de nuevo para

restablecer el punto cero en la pantalla LCD.

3. La unidad se apagará automáticamente si no se ha movido o

no se ha presionado ningún botón después de aproximada-
mente 5 minutos. Para volver a encender la unidad, presione
el botón de encendido/apagado.

Advertising