LumaSense Technologies IN 520 - Manual (Page 32)

Series IN 500 Operating Manual Data format UPP (Universal Pyrometer Protocol) 32
Description Command Parameters
Reading measuring
value:
AAms Output: YYYYY; 5-digit decimal, in 1 /
10
°C or °F
88880 = temperature-overflow
75550 = exceed max. sensor head temp.
74440 = fall below min. sensor head temp.
02563 = 256.3 °C or °F; -0170 = -17.0 °C or °F
repeatedly reading
measuring values: AAmsXXX XXX = 000 ... 999
XXX = Number of measuring values
Emissivity: AAemXXXX XXXX = 0100 ... 1200 in ‰
Response time t
90
: AAezX X = 0 ... 6 (decimal)
0 = intrinsic time constant of the device
1 = 0.5 s 2 = 1 s 3 = 2 s
4 = 5 s 5 = 10 s 6 = 30 s
Setting clear time t
CL
: AAlzX X = 0 ... 8 (decimal)
0 = Max. value- / min. value storage off
1 = 0.10 s 5 = 5.00 s
2 = 0.25 s 6 = 25.00 s
3 = 0.50 s 7 = external clearing
4 = 1.00 s 8 = automatic clearing
External clearing: AAlx Simulation of an external reset contact
Setting maximum /
minimum value: AAmiX X = desired setting
0 = maximum value, 1 = minimum value
Read. max/min value: AAmi Output: 0 or 1; 0 = max value, 1 = min value
Reading basic
measuring range: AAmb Output: YYYYZZZZ (8-digit hex) 2)
YYYY = beginning of measuring range
ZZZZ = end of measuring range
Reading sub range: AAme as with mb
Setting sub range: AAm1YYYYZZZZ YYYY = beginning of measuring range
ZZZZ = end of measuring range
Analog output 1) : AAasX X = 0 ... 4 2 = 0 ... 5 V
0 = 0 ... 20 mA 3 = thermocouple
type K
1 = 4 ... 20 mA
4 = thermocouple
type J
Temperature display 1) : AAfhX X = 0;1 0 = Output Celsius
1 = Output Fahrenheit
Reading ambient
temperature: AAut Output: stored value, 4-digit hex 2)
e.g. 0258 corresponds to 600 degrees
Entering ambient
temperature: AAutXXXX XXXX = Value of ambient temp., 4-digit hex 2)
XXXX z.B. FFEC corresponds to -20 degrees
-99
dez
= FF9D
hex
means: automatic, no
manual compensation
Sensor head temp.: AAgt Output: XXX (dec. 000...180 °C or 032...356 °F)
Max. sensor head
temp.: AAtm Output: XXX (dec. 000...180 °C or 032...356 °F)
Baud rate: AAbrX X = 0 ... 4 0: 1200 bd 1: 2400 bd
2: 4800 bd 3: 9600 bd 4: 19200 bd
Instrument address 1) : AAgaXX XX: device address decimal; 00 ... 31 variable
device addresses; global: 98, 99
Reading switch point: AAsl Output: XXXX (4-digit hex) 2)
Setting switch point: AAslXXXX XXXX (4-digit hex) 2) ; adjustable within sub
range