Rhino Shelter HOUSE-14W X 42L X 15H - Manual

Assembly Instructions RV Style 14 x 42 x 15
V 2.2
Please Do NOT Return Assembly To Dealer or Store. For All Questions and assistance, contact MDM Products directly.
Customer Service 203-877-7070 or 800-447-7079
1
ASSEMBLY INSTRUCTIONS RV
HOUSE STYLE 14x42x15
Congratulations!
Congratulations on your purchase of a RV House
Style Portable Building by MDM Products, LLC.
With proper installation, use and maintenance,
your new unit will provide many years of good and
suitable service. Your new portable building is a
combination of excellent engineering and well
thought out design. The unit is comprised of a rigid
tubular frame, covered with a long life polyethylene
cover and double door ends.
The multiple part frame assembly is pre-drilled for
easy installation. The tubing is made from high-
grade galvanized steel to resist moisture and
oxidation over the life of the shelter. The main
cover and doors are made from ASTM-5 approved
polyethylene materials. The cover is UV protected
for continuous exposure to sunlight.
S A F E T Y W A R N I N G
The installation of this unit must conform to the
requirements of all authorities having
jurisdiction in your specific local area. In the
absence of such requirements, the assembly
and installation must conform to the provided
assembly and installation instructions. MDM
Products, LLC will not be responsible for failure
to comply with any requirements in a given local
area. Damages, consequential damages, or
injuries caused by improper installation,
alteration, improper use, or damages caused by
snow, wind, or any acts of nature are strictly that
of the user. Unit is not intended for occupancy
for any length of time. NO running of internal
combustion engines, open flames or contact
with heated surfaces is allowed.
For installation assistance or Customer Service,
please call 800-447-7079 or 203-877-7070, 8AM-
5PM EST. Cartons should be inspected upon
delivery from carrier, and any evident damages
should be noted on the bill of lading before signing.
If upon opening the cartons hidden damage is
discovered, contact carrier or it’s agent
immediately. Claims for shipping damage MUST
be made with the shipping company by you as he
consignee. In the event of damage, an inspection
of the goods will be required. Do not discard
packing or any components before the freight
company inspection. All claims for freight damage
must be made within 15 days of receipt of the goods
in accordance with ICC regulations.
ASSEMBLY PROCEDURE
The proper sequence and steps to install this unit
will produce a proper and good installation. Failure
to read and follow these guidelines may result in an
improper installation and will void all warranty and
protection the owner is entitled to with the product.
The steps to be undertaken are:
1. Perform an inventory check before
beginning, to be certain all components are
available for installation.
2. Prepare location and place all unit
boxes near site unit will be located.
3. Assemble Eleven (11) arches of unit.
4. Assemble end arch, first interior arch, and
wind braces with the first top, base and side
rail sections.
5. Add additional arch assemblies with each
section of base rails and side rails.
6. Level and square unit.
7. Anchor frame assembly to ground with
provided anchors, U-bolts and drive rod.
8. Install Doors (2) on ends of frame assembly.
9. Install Main Cover over frame assembly.
10. Install Door Roll-up mechanism
TOOLS REQUIRED
The following hand tools will be needed for proper
installation of your new Rhino Shelter Building:
9/16 Open End Wrench
9/16 Socket or Box Wrench
Large Flat Head Screwdriver
2lb maul or Sledgehammer
2 Foot Level
12’ Foot Step Ladder
Stakes & string for squaring area