Rhino Shelter ROUND-30W X 40L X 15H - Manual

Assembly Instructions
30x40x15 Round Style Portable Building With Single Door
1
Version 2.0
Please DO NOT return unit to store or dealer. For all questions or shortages please contact
Customer Service at: 800-447-7079 or 203-877-7070
ASSEMBLY INSTRUCTIONS
ROUND STYLE 30x40x15
WITH SINGLE DOOR
Please read instructions completely before
you begin. This will help attain the best
results for your installation.
CONGRATULATIONS!
Congratulations on your purchase of a MDM Products
30x40x15 Round Style Portable Building. With proper
installation, use, and maintenance your new unit will
provide many years of good and suitable service. Your
new MDM Products portable enclosure is a combination
of excellent engineering and well thought out design.
The unit is comprised of a rigid tubular frame, covered
with a long life polyethylene cover and door ends.
The multiple part frame assembly is pre-drilled for easy
insertion of frame bolts. The tubing is made from high-
grade galvanized steel, resisting moisture and oxidation
over the life of the shelter. The cover and doors are
made from ASTM-5 approved polyethylene materials.
The cover is UV protected for exposure to sunlight.
SAFETY WARNING
The installation of this unit must conform to the
requirements of all authorities having
jurisdiction in your specific local area. In the
absence of such requirements, the assembly
and installation must conform to the provided
assembly and installation instructions. MDM
Products, LLC will not responsible for failure to
comply with any requirements in a given local
area. Damages, consequential damages, or
injuries caused by improper installation,
alteration, improper use, or damages caused by
snow, wind, or any acts of nature are strictly
that of the user. Unit is not intended for
occupancy for any length of time.
For installation assistance or Customer Service, please
call 800-447-7079 or 203-877-7070, 8AM-5PM EST.
Crates should be inspected upon delivery from carrier,
and any evident damages should be noted on the bill of
lading before signing. If upon opening the crates hidden
damage is discovered, contact carrier or it’s agent
immediately. Claims for shipping damage MUST be
made with the shipping company. An inspection of the
goods will most likely be required. Do not discard
packing or any components before the freight company
inspection. All claims for freight damage must be made
within 15 days of receipt of the
goods in accordance with
ICC regulations.
ASSEMBLY PROCEDURE
The proper sequence and steps to install this unit will
produce a proper and good installation. Failure to read
and follow these guidelines may result in an improper
installation and will void all warranty and protection the
owner is entitled to with the product. The overall steps to
be undertaken are:
1. Perform an inventory check before beginning, to
be certain all components are available for
installation.
2. Prepare location and place all unit boxes near
location sight.
3. Assemble Seven (7) Arch Assemblies of unit.
4. Secure Baseplate Flanges to Base Surface.
5. Begin Frame Assembly with Front End Arch, first
Interior Arch, and Wind Braces with the first
ridge crest, and side rail sections.
6. Add additional Interior Arch Assemblies with
each section of side rails.
7. Add Rear Arch and Rear Wind Braces.
8. Install Rear Panel and Front Panel Framing.
9. Install Main Cover over frame assembly.
10. Install Front Fabric Panels over Front Panel.
11. Install Rear Fabric Cover over Back Panel.
12. Install Mechanical Roll Up Door
TOOLS REQUIRED
The following hand tools will be needed for proper
installation of your new MDM Products building:
12mm, 14mm, and 17mm Open End Wrenches
12mm, 14mm, 17mm Sockets or Box Wrench
Large Flat Head Screwdriver2lb maul or Sledgehammer
4-Foot Level
14’ Step Ladder
Stakes & String for aligning Base Plates & Frame
INVENTORY CHECK
Start installation procedure by removing all components from
packaging to ensure all components are present. Inventory
chart appears on the last page of this manual.