Seca Analitics 115 - Manual (Page 6)

6 •
2. SAFETY INFORMATION
2.1 Basic safety information
Handling of the
software
• Note the warnings in the instructions for use.
• Keep these instructions for use and the declaration
of conformity that they contain in a safe place.
• The seca 115 software is not diagnostic software.
The software assists the treating doctor with
creating a diagnosis. For the creation of a precise
diagnosis and for the initiation of therapies, in
addition to the use of the
seca 115 software, careful
examinations must be conducted by the treating
doctor and the results of these taken into
consideration. The responsibility for diagnoses and
the therapies derived from them lies with the treating
doctor.
• Use seca 115 only for the prescribed purpose.
• Use only scales and length measuring devices from
seca together with the seca 115 software.
• Keep HF devices such as mobile telephones and
TVs at least 1 meter away in order to prevent
mistaken measurements and disturbances during
the wireless transmission.
Handling measured
results
• Before you save and re-use measured values in the
seca 115 software (e.g. in a hospital information
system), make sure that the measured values are
plausible and that they correspond to the display on
the measuring device.
• If measured values have been transmitted from the
seca 115 software to a hospital information system,
make sure before re-use that the measured values
are plausible and assigned to the correct patient.