Star Lights Revolution G4-205 Back Pin User Manual

Installation instructions for the revolution g4

Advertising
background image

- 1 -

INSTALLATION INSTRUCTIONS For the REVOLUTION G4

1.

Remove the cover of the fixture and remove

the G4 based 10 watt halogen bulb. (Note - At

this time check to see if the bulb is inserted

straight or at a 10° angle into the fixture) The
REVOLUTION G4™

will adjust for this

difference between fixtures.

2.

Examples of Two different Fixture installations

Fixture 1

Insert the REVOLUTION G4™

into the

fixtures socket, bending the copper ribbon as

shown in Fixture 1 to the right.

Fixture 2

Insert the copper ribbon between the reflector

and the metal body as shown in Fixture 2 to

the right.

3.

Examples of Two different Fixture installations

Fixture 1

Bend the copper ribbon around the old reflector

making sure the ribbon makes contact with the

reflector. The ribbons function is to transfer

heat to the reflector

Fixture 2

Bend the copper ribbon as shown in Fixture 2

to the right.

4.

Examples of Two different Fixture installations

Fixture 1

DO NOT CUT EXCESS RIBBON! Stuff the

excess between the Reflector and the plastics

inside the fixture as shown to the right.

Fixture 2

Bend the Copper ribbon as shown in Fixture 2

to the right and install the G4 into the socket.

The installation may differ from one fixture to

another but always be sure that the copper is

put into contact with the fixtures metal so the

copper can transfer heat!

5.

Replace cover.

Fixture 1

Fixture 2

Fixture 1

Fixture 2

Fixture 1

Fixture 2

- 1 -

INSTALLATION INSTRUCTIONS For the REVOLUTION G4

1.

Remove the cover of the fixture and remove

the G4 based 10 watt halogen bulb. (Note - At

this time check to see if the bulb is inserted

straight or at a 10° angle into the fixture) The
REVOLUTION G4™

will adjust for this

difference between fixtures.

2.

Examples of Two different Fixture installations

Fixture 1

Insert the REVOLUTION G4™

into the

fixtures socket, bending the copper ribbon as

shown in Fixture 1 to the right.

Fixture 2

Insert the copper ribbon between the reflector

and the metal body as shown in Fixture 2 to

the right.

3.

Examples of Two different Fixture installations

Fixture 1

Bend the copper ribbon around the old reflector

making sure the ribbon makes contact with the

reflector. The ribbons function is to transfer

heat to the reflector

Fixture 2

Bend the copper ribbon as shown in Fixture 2

to the right.

4.

Examples of Two different Fixture installations

Fixture 1

DO NOT CUT EXCESS RIBBON! Stuff the

excess between the Reflector and the plastics

inside the fixture as shown to the right.

Fixture 2

Bend the Copper ribbon as shown in Fixture 2

to the right and install the G4 into the socket.

The installation may differ from one fixture to

another but always be sure that the copper is

put into contact with the fixtures metal so the

copper can transfer heat!

5.

Replace cover.

Fixture 1

Fixture 2

Fixture 1

Fixture 2

Fixture 1

Fixture 2

Advertising
This manual is related to the following products: