Tele Vue X-Y Adjustable Mount System (AAC-0002) - Manual

(AAC-0002 )
X-Y Adjustable Mount System
For information call between 9 a.m. and 5 p.m. ET Monday through Friday: 845 469 4551
Copyright © 2004 Tele Vue Optics, Inc., 32 Elkay Dr., Chester, NY 10918. All rights reserved.
AAC-0002 X-Y Adjustable Mount System for quick installation of Tele Vue 60 to Schmidt-
Cassegrain scopes 8" or larger for use as a "superfinder”, or to attach to a Tele Vue Ring Mount.
The AAC-0002 consists of 3-sections (AAM-0001, MBC-1001 & SAB-1001) that can be used in multiple
applications
ç AAM-0001
X-Y Adjustable Mount
(attaches to Tele Vue
Ring Mount slot as is)
ç MBC-1001 è
Mounting Block
ç SAB-1001 è
SCT Accessory Bracket
1) AAM-0001 X-Y Adjustable Mount
The large knob acts as a pivot for the 2 horizontal adjustment screws, while simultaneously acting as the
lock knob for the vertical "jack screw" adjustment.
Removing the "stop screws" on the end of the TV-60 dovetail permits easy removal and installation onto
the similar AAM-0001 dovetail. Remember to reinstall the "stop screw" for safety after the Tele Vue 60 is
mounted.
Note: This mount, without the mounting block and SCT accessory bracket can attach directly to the slots
in the Tele Vue telescope ring mounts.
2) MBC-1001 Mounting Block
When used with the SAB-1001 SCT accessory bracket, this part is normally permanently attached to the
X-Y adjustable mount U-channel with 2 #10-32 button head screws.
3) SAB-1001 SCT Accessory Bracket
This part should be permanently installed on the desired area of your SCT using screws supplied with the
SCT. The plastic knob locks the mounting block (carrying the X-Y adjustable mount) in place. Note the
safety stop and safety counterbore for security. Position on SCT so that stop-screw faces eyepiece end of
telescope.
Your Tele Vue 60 "Super Finder" is now ready for use, instantly removable for field use.
Dovetail
Horizontal Adjustment Screws
Jack Screw
Lock Knob
Stop-Screw
V3/29/07