Tennsco Industrial Workbench with Steel Top - Manual

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
PK-1291010
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1291010
Tennsco Corp., Dickson, TN 37056-1888 • (615) 446-8000
INDUSTRIAL WORKBENCH
With Steel Top
LIMITED WARRANTY
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.
This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons
not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed. UNLESS
CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE HEREBY EXCLUDED:
b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT
SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place
of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by
Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.
TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888
(615) 446-8000 or (866) 446-8686 (toll free)
Website: www.tennsco.com E-mail: [email protected]
GENERAL SAFETY INFORMATION: Some parts may have sharp edges. CARE must be taken when handling various pieces to
avoid injury. For safety, wear a pair of work gloves when assembling or performing any maintenance on your workbench.
Congratulations on your purchase of a Tennsco
Workbench! Tennsco's workbenches are ideally
suited for factories, shops, labs, garages, and
more.
Your workbench features a 12-gauge steel top,
formed into a 1
1 /
2
-inch tall channel formation.
Duplex holes punched into the workbench legs
may be utilized to provide power to your
workbench. The holes are designed to receive
a Steel City electrical box, Model #CDOW (2.5"
x 2" x 3").
Some additional options that are available for
your bench include stackable drawers with an
optional lock, a lower shelf, adjustable legs,
side and back rails, a riser, and an electronic
riser. The parts list on the back of these instruct-
ions provide part numbers for these accessories.
PLEASE NOTE: These instructions are for a workbench with
flared or adjustable legs. If you have ordered a modular work-
bench (with modular door or drawer units instead of legs)
please disregard these instructions and assemble using the
instructions that came with your modular units.