Tennsco Industrial Workbench - Manual

DESCRIPTION
Rugged construction makes these Tennsco workbenches
ideally suited for factories, shops, garages, labs, etc.
Workbenches are shipped unassembled with tops and legs
in separate cartons.
The fixed height, flared legs have all-welded steel
construction with punched holes for attaching stringer, and
lower shelf flanged feet have holes for securing to floor. Legs
are 32" high and 30" or 36" deep.
Duplex knock-outs are punched in each leg to receive a steel
city electrical box, model #CDOW (2.5" X 2" X 3").
Tennsco tops are available in a choice of two widths and
two depths and are pre-drilled for mounting to various
workbench bases. A steel stringer is included to provide
extra rigidity.
Steel Benchtops (S) are constructed of smooth steel
surfaces, reinforced with channels at each end. There are
no exposed sharp edges or corners.
Hard Maple Laminate Benchtops (W) are 1
3 ⁄
4
" thick
laminated solid hard maple with a smooth oil-seal natural finish.
Plastic Laminate Benchtops (P) are 1
5 ⁄
8
" thick with grey
linen, maintenance-free, high pressure non-conductive
plastic laminate over a compressed wood core with a
phenolic backer sheet.
Compressed Wood Benchtops (C) are 1
3 ⁄
4
" thick and
constructed of tempered hardboard top and bottom surfaces
laminated to a high density compressed wood core. A
smooth, sealed finish gives a durable, non-porous surface.
Available options are listed in the replacement parts list
included in these instructions.
SPECIFICATIONS
Overall Dimensions
All 3060 models .......................... 60"w x 30"d x 33 1 ⁄
2
"h
All 3072 models .......................... 72"d x 30"w x 33 1 ⁄
2
"h
All 3660 models .......................... 60"d x 36"w x 33 1 ⁄
2
"h
All 3672 models .......................... 72"d x 36"w x 33 1 ⁄
2
"h
Basic Construction
Steel Top
Top ................................................. 12 gauge steel
Reinforcing Channels ..................... 14 gauge steel
Hard Maple Laminate Top
Top ..............................................Laminated Maple
Compressed Wood Top
Top ........ Hardboard with Compressed Wood Core
Plastic Laminate Top
Top ..............Laminated High Pressure Plastic with
Compressed Wood Core
Legs ...................................................... 14 gauge steel
Upper and lower leg crossmembers ..... 13 gauge steel
Stringer ................................................. 14 gauge steel
Options Available:
Side and back rails Lower Shelf
Standard and electronic riser Stackable Drawer
GENERAL SAFETY INFORMATION
Some parts may have sharp edges. CARE must be taken
when handling various pieces to avoid injury. For safety,
wear a pair of work gloves when assembling or performing
any maintenance on workbench.
ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1290605
INDUSTRIAL WORKBENCH
Tennsco Corp., Dickson, TN 37056-1888 * (615) 446-8000
READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING
TO ASSEMBLE YOUR Tennsco INDUSTRIAL WORKBENCH.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!
REF. NO. DESCRIPTION PART NUMBER QTY.
1A Flared Leg (WB-X-3060X, WB-X-3660X, WB-X-3070X) L-3230 1
Flared Leg (WB-X-3672X) L-3236 1
1B Adjustable Leg (WBA-X-3060X, WBA-X-3660X, WBA-X-3070X) AL-3230 1
Adjustable Leg (WBA-X-3672X) AL-3236 1
2 Lower Steel Shelf (All 60" Wide) S-60 1
Lower Steel Shelf (All 72" Wide) S-72 1
3 Stringer (60" Wide) WBS-60 1
Stringer (72" Wide) WBS-72 1
4 Steel Bench Top w/Stringer (30" x 60") T-3060 1
Steel Bench Top w/Stringer (30" x 72") T-3072 1
Steel Bench Top w/Stringer (36" x 72") T-3672 1
Compressed Wood on Wood Top w/Stringer (30" x 60") CT-3060 1
Compressed Wood on Wood Top w/Stringer (30" x 72") CT-3072 1
Compressed Wood on Wood Top w/Stringer (36" x 72") CT-3672 1
Plastic Laminate Top w/Stringer (30" x 60") PT-3060 1
Plastic Laminate Top w/Stringer (30" x 72") PT-3072 1
Plastic Laminate Top w/Stringer (36" x 72") PT-3672 1
Solid Maple Top w/Stringer (30" x 60") MT-3060 1
Solid Maple Top w/Stringer (30" x 72") MT-3072 1
Solid Maple Top w/Stringer (36" x 72") MT-3672 1
5 Top End Channel (also called Mounting Bracket) -- Included w/Steel Top 4
6 Drawer (WBD-1) 976CDW 1
7 Drawer Housing (WBD-1) 976CDH 1
8 Padlock Hasp (WBD-1) 976PH 1
9 Tray (WBD-1) 976T 1
10 Divider (WBD-1) WBDD-12 1
11 Riser Support (All Units) WBRS-2 2
12 Riser Shelf (60" Wide) WBRS-60 1
Riser Shelf (72" Wide) WBRS-72 1
13 Side Rail (30" Deep Units) 189SS 2
Side Rail (36" Deep Units) 404SS 2
14 Back Rail (60" Wide) 189BS1 1
Back Rail (72" Wide) 404BS 1
15 Electronic Riser Shelf (60" Wide) EWRS-6015 1
Electronic Riser Shelf (72" Wide) EWRS-7215 1
16 Wire trough (60" Wide) EWWT-60 1
Wire trough (72" Wide) EWWT-72 1
K
Wiring Kit (not shown in figure) WK-1
K
Cam Lock CL-1
• 1 ⁄
4
"-20 x 5 ⁄
8
" Bolt
♦
• 1 ⁄
4
"-20 Nut
♦
• 1 ⁄
4
" Lockwasher
♦
•
#14 x 3 ⁄
4
" Hex Head Slotted Wood Screw
♦
•
#10 x 1 ⁄
2
" Sheetmetal Screw
♦
K
Optional Accessory
♦
Standard hardware item, available locally
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However,
should your unit contain missing or damaged parts, replacements may be obtained directly from Tennsco. To
obtain proper replacement parts, follow the instructions below:
TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:
•
Model Number
•
Description of part(s) needed and part
number(s) as shown in Parts List (above)
•
Color
•
Purchase date
•
Your company name
•
Contact person’s name
•
Who the product was purchased from
Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888
Voice (800) 251-8184 Fax: (800) 722-0134
If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.