Tomlinson SF2100 Molded Cabinet - Manual

O:\Cad\JME INSTRUCTION SHEETS\1915604A.dwg
1 of 2
14 oz. - 32 oz.
3-1/2" - 4-7/16"
(89mm - 113mm)
GASKET REFERENCE CHART
CHANGING CUP SIZE:
IMPLI
FIGURE 2
S
LEX 2100
F -
®
(57mm - 98mm)
2-1/4" - 3-7/8"
3-1/2 oz. - 14 oz.
Dimension Letter:
Cup Lip Diameter:
Cup Ounce:
(Metric)
"5B"
GASKET SIZE REFERENCE
NOTE: CAUTION when removing gasket, pusher may be under small amount of spring tension.
Remove cups from cabinet dispenser. (See Figure 1 illustration C thru A)
Remove decorative clamp ring. (See Page 2 Figure 4 illustration A and B)
Peel off gasket from lip of dispenser tube. (See Page 2 Figure 4 illustration C and D)
Replace gasket with desired size. (See Figure 2 Reference Chart)
Reassemble cabinet dispenser in reverse order. (See Page 2 Figure 4 illustration D thru A)
5.
4.
1.
2.
3.
4-1/4" - 4-5/8"
(108mm - 117mm)
32 oz. - 44 oz.
"5A" "5E"
Lower into recess top of other cabinet until level and flush in all four corners.
gasket until cups penetrate inside unit. (See Figure 1 illustration B and C)
With one hand holding the back of the cabinet dispenser, push cups firmly into
For reference to instructions below use exploded view of cabinet dispenser. (See figure 3)
Your Modular SIMPLI-FLEX cabinet dispenser is completely self-adjusting
Visually align cups with center of gasket and pusher. (See Figure 1 illustration A and B)
Your Modular SIMPLI-FLEX cabinet dispenser interlocks vertically by design
for your convenience, leaving more counter space available for you!
Position the bottom of second cabinet over the top of the first cabinet.
Place one cabinet firmly on counter.
MODULAR
DISPENSING SYSTEMS
Phone: 216/587-3400
www.tomlinsonind.com
Cleveland Ohio 44125-1992
DIVISION OF TOMLINSON INDUSTRIES
13700 Broadway Ave.
World Class, Worldwide
Fax: 216/587-0733
Tomlinson Industries 1999 ©
NSF
®
LOADING THE DISPENSER:
and can dispense virtually any size or shape of cup!
NOTE: bottom of cups to be facing out.
STACKING CABINET DISPENSER:
Unwrap desired cups for dispenser.
3.
2.
1.
2.
3.
1.
®
®
-
STACKABLE CABINET CUP DISPENSERS
S
IMPLI LEX 2100
F
®
Form 1915604 Printed in the U.S.A. 9/00
Patent Pending
FIGURE 1
(B) (C)
LEX 2100 IMPLI
S F -
® EXPLODED VIEW
FIGURE 3
1 Decorative clamp ring
2 Gasket(s)
3 Pusher
4 Spring
5 Screw(s)
6 Dispenser tube
7 Cabinet
No. Description
For reference to instructions below use exploded view of cabinet dispenser. (See Figure 3)
(A)
®