HT instruments HT950N - Manual (Page 13)

HT950N
EN - 13
5.4.1. Example of HT950N meter setup
In the following Fig. 9 is possible to see a simple example diagram with programmable
parameters T1, T1, UA, UF, with relative meaning.
Fig. 9: Example of HT950N meter setup
5.5. CLEAR OF RECORDED MAX TEMPERATURE VALUE
To execute clear of maximum value of temperature recorded by HT950N meter, do the
following procedure:
1. Press T.MAX key to show the maximum temperature value on PARA and SET display.
2. Press [] key before both display lights off. On SET display compare 00 value.
3. From this instance the meter start to recording new maximum values.