HT instruments MACROTEST 5035 - Manual (Page 7)

MACROTEST 5035
EN - 6
2.2. INSTRUMENT DESCRIPTION
1
2
3
DISP
RCL
ESC
SAVE
CLR
START
STOP
FUNC U n /I ∆n
DIST S U L
LEGEND:
1. Display
2. Function keys
3. Rotary switch
FUNCTION key to select one measuring mode.
U
n
/I
∆n
DIST key for selection of rated voltage, differential current or
distance depending on which measurement is selected.
S▲key for selection of RCD type (Common or Selective) or to increase
the test duration interval or to scroll the results of the stored tests.
U
L
▼ key for selection of contact voltage limit or to decrease the test
duration interval or to scroll the results of the stored tests.
ON/OFF key. Keep it pressed some seconds for switching off the
instrument.
START/STOP key to start or to stop tests.
DISPLAY key to scroll the single and multiple tests (Ex: RCD AUTO)
which have been effected and stored.
CLEAR key to cancel the stored tests.
RECALL/ESCAPE key to recall the stored tests (RCL) and leave the
selected function or mode (
ESC).
SAVE key to save tests.
FUNC
START
STOP
CLR
RCL
ESC
DISP
SAVE
U
n
/I
∆n
DIST
S▲s
U
L
▼